View previous topic :: View next topic |
Author |
Message |
HoosierConn Regular Member
Joined: 17 Mar 2010 Posts: 18 Location: Ohio
|
Posted: Tue Apr 25, 2017 5:07 pm Post subject: Why nickel construction then and not now? |
|
|
I was taken with a Reynolds Argenta on eBay and bid on it, but was $100 short of winning. (A less expensive early Holton Galaxy will scratch the itch. I hope.) I wonder why there was the fascination with nickel and/or nickel silver horns and/or bells around the mid-to-late 1950s? Consider the Reynolds Argenta, the Buescher Super 400, the Holton Galaxy. Olds and York had the nickel bell flares available, or nickel plated horns. Conn nickel plated the Connstellation bells and a lot of other parts. I wonder, if the Reynolds statement is valid, that
This feature [nickel silver construction] provides the trumpet player with a ‘dark’ tone, rather than the usual sound of brass brilliance.
Instruments made of solid nickel silver tend to have a darker, clearer tone compared to standard brass alloys. Nickel silver emphasizes the lower and higher overtone series, resulting in a sound that resonates very clearly in the corresponding registers. Nickel silver horns also tend to project more dramatically than other brass alloys and can easily throw an ensemble section out of balance without care; they are often used where a homogeneous section balance isn’t emphasized, e.g. as a soloist instrument or in a small mixed-instrument horn line. (This from the contemporacorner.com site.)
Why would the market be seeking a "dark" tone, with a lot of projection? Maynard wasn't "the man" at the time, but Stan Kenton was around, right?
Any ideas? With everything being market-driven then and now, I wonder what the thought process was then? |
|
Back to top |
|
|
1jazzyalex Heavyweight Member
Joined: 13 Jun 2016 Posts: 569 Location: San Jose, CA
|
Posted: Tue Apr 25, 2017 9:16 pm Post subject: |
|
|
Interesting question!
https://en.wikipedia.org/wiki/Nickel_silver
Maybe it's harder to work with? I've seen pieces of "silverware" made out of it and when you tap them they really ring. And I know some trumpets (and saxes and let's not even bring up flutes) have sterling silver parts so people are willing to pay extra for a different metal. _________________ Yamaha 8335LA with Blessing 3C, 5C, Schilke 11A4A |
|
Back to top |
|
|
Irving Heavyweight Member
Joined: 11 Feb 2003 Posts: 1887
|
Posted: Tue Apr 25, 2017 9:33 pm Post subject: |
|
|
I had a couple of Argentas from the 60's. These horns had a .468 bore while the earlier ones had a .462 bore. The later horns had a small bell. Don't know about the earlier ones. Anyway, it wasn't a dark horn by any means. |
|
Back to top |
|
|
stumac Heavyweight Member
Joined: 19 Nov 2008 Posts: 697 Location: Flinders, Australia
|
Posted: Tue Apr 25, 2017 11:58 pm Post subject: |
|
|
Nickle silver is certainly harder to work than yellow brass, I made a 1" wide Kranz for a project horn, it took 27 anealings to get the final shape.
A visit to the Eclipse factory I played the MY, MR and MS belled horns, the MS was the brightest with Nickle silver bell tail and throat with yellow brass flair.
Leigh showed me a Nickle silver bell that he had tried and considered was too bright.
I have a Holton Super Collegiate with Nickle silver flair on a copper throat and tail that is not dark at all.
Regards, Stuart. |
|
Back to top |
|
|
Benge.nut Heavyweight Member
Joined: 18 Mar 2017 Posts: 695
|
Posted: Wed Apr 26, 2017 4:26 am Post subject: |
|
|
"The usual formulation is 60% copper, 20% nickel and 20% zinc"
This I did not know. I was not aware that nickel used in instruments was primarily a brass alloy.
I was always confused, is nickel plate is used on woodwind instrument keys, and flutes and French horns, why is it sometimes the lacquer on top of nickel instruments like the Conn Connstellations?
And those 36b and 38b trumpets sound pretty bright to me!! I wouldn't call them dark, but maybe my ear is off!! |
|
Back to top |
|
|
James Becker Heavyweight Member
Joined: 02 Sep 2005 Posts: 2827 Location: Littleton, MA
|
Posted: Wed Apr 26, 2017 4:26 am Post subject: |
|
|
Generally speaking the hardness of nickel vs yellow brass can be offset by increasing the bore, bell size or bell alloy. I like to think of it as being part of "the recipe" that balances sound quality along with blow resistance.
In the making of French Horns nickel silver is used for large bell Keuspe style models, i.e. Conn 8D, Yamaha YHR-668N and alike. The more complex overtones produced by nickel silver and added blow resistance compliments these wider bell designs. For more focused medium bell designs by Knopf, Geyer, Yamaha YHR-667 and alike yellow brass is preferred.
More information can be found here on the effects of bell size and alloys used on Engelbert Schmid Horns http://www.osmun.com/schmid_bell much of which applies to all brasswinds regardless of voice.
The use of nickel silver for trumpet /cornet inner slides will often be matched with gold brass bells and larger bores/bells. This also holds true of Bach LT model trombones where nickel silver outer hand slides are matched with gold brass bells for their LT36G/LT36BG, LT42G/LT42BG, LT50BG. The exception being the smaller bore LT12, LT16 and LT16M models.
I hope this is helpful _________________ James Becker
Brass Repair Specialist Since 1977
Osmun Music Inc.
77 Powdermill Road Rt.62
Acton, MA 01720
www.osmun.com
Our workshop is as close as your nearest UPS store https://www.ups.com/dropoff?loc=en_US |
|
Back to top |
|
|
chapahi Heavyweight Member
Joined: 13 Sep 2005 Posts: 1467 Location: Stuttgart, Germany
|
|
Back to top |
|
|
Irving Heavyweight Member
Joined: 11 Feb 2003 Posts: 1887
|
Posted: Wed Apr 26, 2017 6:08 am Post subject: |
|
|
Nickel silver was used as trim on all Bach Strad regular weight trumpets, until they stopped using it on silver plated Bb (and possibly C trumpets as well). They still use nickel silver trim on their lacquered Strads (not on any of the lightweights though). As Jim mentioned, it was part of the recipe, and the blend of nickel silver and brass made for a great sound. Other brands of trumpets use both metals as well. Some makers will make their lead pipes out of nickel silver since they aren't susceptible to red rot like brass is. The Argenta is the only trumpet (as far as I know) that was completely made out of nickel silver. Why doesn't anybody make nickel silver trumpets now? I guess that it was tried, and not deemed superior to brass and brass/nickel. It is more difficult to work with, and it must be more expensive (otherwise why did Bach decide to stop using it on their silver plated Strads?
Last edited by Irving on Wed Apr 26, 2017 6:09 am; edited 1 time in total |
|
Back to top |
|
|
Benge.nut Heavyweight Member
Joined: 18 Mar 2017 Posts: 695
|
Posted: Wed Apr 26, 2017 6:09 am Post subject: |
|
|
I don't know...it's hard to tell anything from a video.
Plus I've watched a ton of Trents videos recently, and they all kinda sound the same to me. Trent is a GREAT player, very interesting lines and bop vocab. But he has a very dark sound no matter what he plays, and he rarely plays at volumes that can help you can really get an idea of what the horn might be capable of. Trent is very refined and again a great player and looks like he's doing quite well building his business.
I'm glad he posts them, as I always am intrigued to see some cool vintage horns, and the latest from the Adams folks.
Same goes for Horntrader. He's a great player and I love all the neat horns...but Steve sounds like Steve on all his vids. I like that he plays dynamic volumes all over the spectrum. But his high chops sound IDENTICAL on every horn hahaha.
My point is of course it's hard to tell anything on a vid, and the guys demoinstrating the horns are gonna sound like themselves no matter what they play. But I'm glad they post them and I'm sure get some buzz from potential customers and I wish them all the success in the world!! |
|
Back to top |
|
|
Danbassin Veteran Member
Joined: 13 Oct 2013 Posts: 460 Location: Idyllwild, CA
|
Posted: Wed Apr 26, 2017 6:34 am Post subject: |
|
|
The folks at MK Drawing have a nice set of working descriptions for various alloys here: https://www.mkdrawing.com/alloy-options/
And, of virtually-equal importance is their caveat, "PLEASE NOTE: The above descriptions are to used as a guide only…the terms “brighter, darker, warmer etc.” are very relative terms; what one player considers bright may not be considered bright by someone else"
That said, Mr. Becker's statement above, and link to Osmun's horn bell descriptions is also invaluable. We - or at least I - tend to think of other brass instrument families as being a bit more 'open-minded' when it comes to instrument designs, if only to think of how long the 'entire' trumpet world was playing silver plated Bach 37s. Sure they're good horns, sure they work well and aid the player in producing a 'characteristic' trumpet sound, but we shouldn't look too far past the phenomenon of the 'visual ear' when it comes to unusual materials and design features not taking off in the trumpet world.
(French) Horns aren't immune to it, either, as witnessed by the relatively recent move of the 'entire' world to nickle Conn 8D style instruments, and then back away, most recently to triple horns made in yellow brass.
There are positives and negatives with incorporating any boutique design innovation into a horn, and, as Mr. Becker pointed out, many design adjustments to best complement and highlight the positives of these features.
On a personal note, I recently satisfied a musical-material curiosity dating back to when I got my first horn (yes, a Silver-plated Bach 37, ML, 25, etcetcetc) --- I remember playing several horns before convincing myself that the standard was the best, and I vividly remember one non-standard horn that had some really special about it. This was back in the early-mid 90s, at Sam Ash on W 48th Street in NYC. The horn that I still haven't forgotten was also a Bach, but a "Sterling Plus" bell (I can't recall which mandrel) on a Lightweight Reverse body.
Cut to just a few weeks back, and I found a sweet deal on a Sterling Silver 72 with a raw brass body and reverse pipe. I've fitted it with an aftermarket leadpipe that I'd previously been using on another horn (still in reverse configuration, though) and am having a great time getting to know the unique properties of this non-brass part, and am happy to have it as an alternative color for my palette.
Best,
-DB _________________ Daniel Bassin
Conductor/Composer/Trumpeter/Improviser/Educator
I play:
Monette - CORNETTE/PranaXLT-STC Bb/MC-35/Raja A Piccolo;
Kromat C-Piccolo; Thein G-Piccolo; Various antique horns
MPCs - Monette Unity 1-7D and DM4LD
Last edited by Danbassin on Wed Apr 26, 2017 9:10 am; edited 1 time in total |
|
Back to top |
|
|
Richard III Heavyweight Member
Joined: 22 May 2007 Posts: 2655 Location: Anacortes, WA
|
|
Back to top |
|
|
razeontherock Heavyweight Member
Joined: 05 Jun 2004 Posts: 10609 Location: The land of GR and Getzen
|
Posted: Wed Apr 26, 2017 7:29 am Post subject: |
|
|
I love my nickel plated horns! They do seem to share 'something' in common, but I hesitate to conclude I could re-create that on a horn not designed to be nickel plated.
Nickel also seems to be the most expensive part of making a horn. |
|
Back to top |
|
|
James Becker Heavyweight Member
Joined: 02 Sep 2005 Posts: 2827 Location: Littleton, MA
|
Posted: Wed Apr 26, 2017 8:43 am Post subject: |
|
|
To be clear, nickel silver is an alloy from which an instrument's components are fabricated. Likewise 925 sterling silver is an alloy of 92.5% silver and the remainder made up of copper or other.
Nickel plating on the other hand is a thin decorative finish applied over an instrument usually made from brass, copper, nickel silver or other.
Visually similar, nickel silver will have a bit of a green hue and cupro-nickel a bluish hue (similar to the look of chrome), while nickel plate will have more of a mirror like appearance and is harder than nickel silver.
I hope this is helpful. _________________ James Becker
Brass Repair Specialist Since 1977
Osmun Music Inc.
77 Powdermill Road Rt.62
Acton, MA 01720
www.osmun.com
Our workshop is as close as your nearest UPS store https://www.ups.com/dropoff?loc=en_US
Last edited by James Becker on Wed Apr 26, 2017 1:46 pm; edited 1 time in total |
|
Back to top |
|
|
Voltrane Heavyweight Member
Joined: 20 Jan 2006 Posts: 629 Location: Paris (France)
|
Posted: Wed Apr 26, 2017 9:32 am Post subject: |
|
|
razeontherock wrote: |
Nickel also seems to be the most expensive part of making a horn. |
Do not know today but in Couesnon's time, nickel plating was far cheaper than silver plating (see page 91 of this link)
http://www.luthiers-mirecourt.com/couesnon_1912_2.htm
Regards. |
|
Back to top |
|
|
Danbassin Veteran Member
Joined: 13 Oct 2013 Posts: 460 Location: Idyllwild, CA
|
Posted: Wed Apr 26, 2017 9:33 am Post subject: |
|
|
James Becker wrote: | Likewise 925 sterling silver is an alloy of 92.5% silver and the remainder made up of copper or other. |
Not to hijack the thread, Jim, but I'm curious about the history of Bach and others working with Sterling Silver. I know that the horn I have now is the more standard 925, but that for a period of time "Sterling Plus" bells were made with a somewhat higher silver content. I'm about 92.5% certain this was a mid-90s changeover, but could you give us some background on working with these various materials?
Are nickel bells just a pain to work with, or did they require a non-standard alloy when compared to, say, valve slides?
Is 925 Sterling Silver easier to work with than an ever purer version, or are there material cost concerns?
Thank you for your consistently excellent, enlightening posts in this forum!
-DB _________________ Daniel Bassin
Conductor/Composer/Trumpeter/Improviser/Educator
I play:
Monette - CORNETTE/PranaXLT-STC Bb/MC-35/Raja A Piccolo;
Kromat C-Piccolo; Thein G-Piccolo; Various antique horns
MPCs - Monette Unity 1-7D and DM4LD |
|
Back to top |
|
|
razeontherock Heavyweight Member
Joined: 05 Jun 2004 Posts: 10609 Location: The land of GR and Getzen
|
Posted: Wed Apr 26, 2017 10:43 am Post subject: |
|
|
Voltrane wrote: | razeontherock wrote: |
Nickel also seems to be the most expensive part of making a horn. |
Do not know today but in Couesnon's time, nickel plating was far cheaper than silver plating (see page 91 of this link)
http://www.luthiers-mirecourt.com/couesnon_1912_2.htm
Regards. |
Very cool! I live about 45 minutes' drive from the Getzen factory, so of course I had to take a tour. They showed me how it's done, and being super energy intensive and environmental regs contribute to the cost. Not really factors in years past |
|
Back to top |
|
|
HoosierConn Regular Member
Joined: 17 Mar 2010 Posts: 18 Location: Ohio
|
Posted: Wed Apr 26, 2017 5:11 pm Post subject: |
|
|
[quote="Benge.nut"]
I was always confused, is nickel plate is used on woodwind instrument keys, and flutes and French horns, why is it sometimes the lacquer on top of nickel instruments like the Conn Connstellations?
According to Sean Mason, a tech who moderates the "Trumpets For Sale Or Trade" page on Facebook, nickel will tarnish just like other metals. |
|
Back to top |
|
|
Crazy Finn Heavyweight Member
Joined: 27 Dec 2001 Posts: 8334 Location: Twin Cities, Minnesota
|
Posted: Wed Apr 26, 2017 7:45 pm Post subject: |
|
|
Irving wrote: | The Argenta is the only trumpet (as far as I know) that was completely made out of nickel silver. Why doesn't anybody make nickel silver trumpets now? I guess that it was tried, and not deemed superior to brass and brass/nickel. |
I have an older Selmer Signet cornet that is entirely nickel plated. One of my students last year had one as well. Maybe that's not the same, but I haven't seen too many like that, either. _________________ LA Benge 3X Bb Trumpet
Selmer Radial Bb Trumpet
Yamaha 6335S Bb Trumpet
Besson 709 Bb Trumpet
Bach 184L Bb Cornet
Yamaha 731 Bb Flugelhorn |
|
Back to top |
|
|
chapahi Heavyweight Member
Joined: 13 Sep 2005 Posts: 1467 Location: Stuttgart, Germany
|
Posted: Wed Apr 26, 2017 11:42 pm Post subject: |
|
|
Hi. Vids one and two are both the nichol horn.
Here's the one I think you meant.
https://www.youtube.com/watch?v=0fGoM1tdRdk _________________ Sima, Kanstul 1525 Flugel and Kanstul pocket trumpet. Olds Super |
|
Back to top |
|
|
James Becker Heavyweight Member
Joined: 02 Sep 2005 Posts: 2827 Location: Littleton, MA
|
Posted: Thu Apr 27, 2017 5:18 am Post subject: |
|
|
Danbassin wrote: | James Becker wrote: | Likewise 925 sterling silver is an alloy of 92.5% silver and the remainder made up of copper or other. |
Not to hijack the thread, Jim, but I'm curious about the history of Bach and others working with Sterling Silver. I know that the horn I have now is the more standard 925, but that for a period of time "Sterling Plus" bells were made with a somewhat higher silver content. I'm about 92.5% certain this was a mid-90s changeover, but could you give us some background on working with these various materials?
Are nickel bells just a pain to work with, or did they require a non-standard alloy when compared to, say, valve slides?
Is 925 Sterling Silver easier to work with than an ever purer version, or are there material cost concerns?
Thank you for your consistently excellent, enlightening posts in this forum!
-DB |
Thanks DB, I haven't any experience forming bells but have repaired quite a few over the last 40 years. Here's what I know about sterling vs. sterling plus. vs. nickel silver.
925 sterling silver sheet is what King and others have used for bell making. As an alloy it is structurally stronger and holds it's shape better than pure silver. It is so strong that casing sterling silver for flute keys is standard practice. Repairing bells made of sterling is a bit different than brass, but can be done with relative ease.
Bach's Sterling Plus (TM) and Schilke's 99.9% pure silver bells are electro-formed in the same manner as Conn Coprion. Having no other metal in the mix makes these bells extremely soft and prone to damage. Early on Bach experienced a high scrap rate in the making of these bells, the added waste drove up production costs. To repair these bells is akin to working with a stick of chewing gum, there's little or no spring back memory with 99.9 pure silver making it very different than any other bell material I've worked with. In addition lacquer does not bond well on these bells, better to electroplate with silver or gold for a longer lasting finish.
Nickel silver sheet can be annealed and worked in the same manner as brass, but has greater spring back memory when work hardened. We have extensive experience working with Conn, Holton, King and other brands of French horns made of nickel silver and they can be more challenging when repeatedly damaged and repaired.
Though these three materials have their unique sonic qualities, I'm not convinced they are for everyone. There's a good reason the vast majority of trumpet bells are made of 70/30 brass. Quite a bit of variance can be achieved with different bell shapes/sizes, wall thickness and treatment of standard yellow brass.
My 2 cents. _________________ James Becker
Brass Repair Specialist Since 1977
Osmun Music Inc.
77 Powdermill Road Rt.62
Acton, MA 01720
www.osmun.com
Our workshop is as close as your nearest UPS store https://www.ups.com/dropoff?loc=en_US |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|