View previous topic :: View next topic |
Author |
Message |
Dan O'Donnell Heavyweight Member
Joined: 01 Jan 2005 Posts: 2287
|
Posted: Thu Jul 31, 2014 6:12 pm Post subject: Carol Pocket Trumpet Valve Issues |
|
|
TH Friends,
A while back, I purchased a new Carol Pocket Trumpet from The Horn Trader that I use for practice only.
Off and on, I have found the valves to jam up.
I cleaned it thoroughly and I use Ultra Pure Valve Oil.
Today, I found that if I rotate the valves very slightly and take out any "play" with the slightly loose radial movement of the valves (like many horns have) the valves get hung up with the feeling of "metal to metal".
I now know why it happened on and off...it all depends if the the position of the valve was rotated to either side of the small radial movement and since this changes with fingerings etc. it was hit or miss.
Saturday, I am taking it to my Brass tech. however, I wanted to know if any of you who own one found the same problem.
Please let me know because I am interested in what you found as the root cause...Valve Guide?...etc. etc. etc. _________________ God Bless,
Dan O'Donnell
"Praise Him with the sound of the Trumpet:..."
Psalms 150:3 |
|
Back to top |
|
|
mm55 Heavyweight Member
Joined: 01 Jul 2013 Posts: 1412
|
Posted: Thu Jul 31, 2014 7:28 pm Post subject: |
|
|
I;ve had absolutely no problems at all with my Carol CPT-300LR (which I believe is the same as the current CarolBrass CPT-3000; same valves). I bought it used, and I have kept it well lubricated with Hetman #1. I use it for practice when traveling, and occasionally for jamming when traveling, including outdoors in the northern winter, and the valves have never shown so much as a hiccup. Occasionally I have had minor issues with the 1st and 3rd valve slides, but never the valves. _________________ '75 Bach Strad 180ML/37
'79 King Silver Flair
'07 Flip Oakes Wild Thing
'42 Selmer US
'90 Yamaha YTR6450S(C)
'12 Eastman ETR-540S (D/Eb)
'10 Carol CPT-300LR pkt
'89 Yamaha YCR2330S crnt
'13 CarolBrass CFL-6200-GSS-BG flg
|
|
Back to top |
|
|
etc-etc Heavyweight Member
Joined: 19 Jan 2008 Posts: 6187
|
Posted: Thu Jul 31, 2014 7:39 pm Post subject: |
|
|
Rotating valves is best avoided as it scores the valve pistons in the wrong direction (perpendicular to valve piston motion). For tight valves, such as in your Carol, you may want to wipe off the valves and casings with a moist chamois cloth every time after playing, then re-oil - but do not rotate. |
|
Back to top |
|
|
jvand678 Heavyweight Member
Joined: 02 Apr 2007 Posts: 809 Location: TX
|
Posted: Thu Jul 31, 2014 7:44 pm Post subject: |
|
|
Dan,
My first instinct is always that the valves and/or casings are dirty. With this being a new(ish) horn it could also be shavings from break in.
After cleaning them, if it still hangs, it could be something as simple as a slight burr on one of the valve port edges. The final hand lapping mvt is generally going to be up and down so it may have the burr worn in in one position and not in a another. Either way, fairly easy fix and your repairman should be able to knock it out in a few minutes. _________________ Joe Vandiver |
|
Back to top |
|
|
Dan O'Donnell Heavyweight Member
Joined: 01 Jan 2005 Posts: 2287
|
Posted: Thu Jul 31, 2014 7:53 pm Post subject: |
|
|
I appreciate all of your responses!
I'll write back with my Brass Tech.s input after he fixes the issue.
Thank You! _________________ God Bless,
Dan O'Donnell
"Praise Him with the sound of the Trumpet:..."
Psalms 150:3 |
|
Back to top |
|
|
Venturi Veteran Member
Joined: 02 Apr 2012 Posts: 262
|
Posted: Thu Jul 31, 2014 8:11 pm Post subject: |
|
|
Good thing you've cleaned it thoroughly.
That said, I wonder whether you've used a mild detergent in the cleaning process. New valves shed minute particles of metal as they get broken in, and in my experience you need to wipe the valve conscientiously with cloth to remove the fine layer of oil + metal particles that forms with early use -- and, sometimes, treatment with a solution of mild detergent (like Dawn) really helps the process.
The wiping doesn't get the particles within the valve ports which can then move into the vale casing -- but the detergent will. |
|
Back to top |
|
|
jvand678 Heavyweight Member
Joined: 02 Apr 2007 Posts: 809 Location: TX
|
Posted: Thu Jul 31, 2014 8:36 pm Post subject: |
|
|
Venturi wrote: | The wiping doesn't get the particles within the valve ports which can then move into the vale casing -- but the detergent will. |
Guess I should've elaborated a bit more on cleaning them
They can also get quite a build up while in storage waiting for their new owner in certain spots on the casings. If I can see the discoloration, I usually can't get that buildup out with dish soap. It usually takes a tougher approach like LIGHTLY polishing it out with brasso, a lint free cloth and a dowel. Then I go back with the dawn and a casing brush to remove any of the cleaner. _________________ Joe Vandiver
Last edited by jvand678 on Fri Aug 01, 2014 5:43 am; edited 1 time in total |
|
Back to top |
|
|
superviking805 Veteran Member
Joined: 17 Dec 2009 Posts: 154 Location: Santa Barbara
|
Posted: Thu Jul 31, 2014 8:41 pm Post subject: |
|
|
Quote: | It usually takes a tougher approach like polishing it out with brasso, |
Brasso removes metal. I sure would not use on the valves in any horn I wanted to keep. |
|
Back to top |
|
|
jvand678 Heavyweight Member
Joined: 02 Apr 2007 Posts: 809 Location: TX
|
Posted: Thu Jul 31, 2014 8:52 pm Post subject: |
|
|
superviking805 wrote: | Quote: | It usually takes a tougher approach like polishing it out with brasso, |
Brasso removes metal. I sure would not use on the valves in any horn I wanted to keep. |
Very true, as do lapping compounds (when fitting the valves) and metal to metal contact when the valves are moving (even with valve oil). If Brasso scares you, perhaps Maas would be more suitable. Either way, with corrosion buildup, something has to be used to remove it.
Good luck, _________________ Joe Vandiver |
|
Back to top |
|
|
bwoodard Heavyweight Member
Joined: 08 Jan 2009 Posts: 623 Location: Mich.
|
Posted: Fri Aug 01, 2014 4:41 am Post subject: |
|
|
I guess I don't understand the issue with rotating freshly oil valves in the casing to help distribute the oil. When valves and cases are lapped during final fitment it is in a rotational direction, not horizontal. I have rotated valves in all my horns for years with no issue. _________________ Veteran comebacker!
Bob
2015 Harrelson Summit 4/10
2014 Getzen 4895 Flugelhorn
2014 Getzen 3850
2010 Callet Sima Bb
2010 Callet Sima C
73 Getzen Eterna Severinsen
48 Conn 80A Victor Cornet |
|
Back to top |
|
|
trumpaholic Heavyweight Member
Joined: 02 Sep 2005 Posts: 1501 Location: Lindsay Ontario Canada
|
Posted: Fri Aug 01, 2014 4:58 am Post subject: |
|
|
I have owned 4 Carol Brass horns. Hetman worked best in all of them. I suggest using some Hetman 2 in it as my experience with Ultra Pure is that the oil is too thin. Using brasso is NOT a good idea, I would send it back to whoever you bought it from if it is still under warranty. I currently have a Carol 8060 H GLS with very tight valves and use Hetman 1 in it. _________________ Have horn, will travel! |
|
Back to top |
|
|
veery715 Heavyweight Member
Joined: 13 Aug 2007 Posts: 4313 Location: Ithaca NY
|
Posted: Fri Aug 01, 2014 5:14 am Post subject: |
|
|
Give it a thorough cleaning and make sure you get inside the ports and through tubes between valves. Then use some of Flip Oakes valve oil, which is formulated with a detergent which helps to clean valves as they are breaking in. Sit with the horn and work the valves up and down while watching TV or something; clean and re-oil often and the problem should go away.
Rotating valves is never a good idea. It is not necessary to do this to distribute oil as capillary action will pull the oil into the gaps. I know we often need to rotate them when inserting them to get the valve guides to snap into place, but this is the only rotation one should ever do. If the valves seem to get tight when you turn them a little, that is normal, as the wear pattern gets centered in the middle of that slack, and will be tighter at the end points. _________________ veery715
Hear me sing!: https://youtu.be/vtJ14MV64WY
Playing trumpet - the healthy way to blow your brains out. |
|
Back to top |
|
|
TrumpetMD Heavyweight Member
Joined: 22 Oct 2008 Posts: 2415 Location: Maryland
|
Posted: Fri Aug 01, 2014 6:11 am Post subject: Re: Carol Pocket Trumpet Valve Issues |
|
|
Dan O'Donnell wrote: | however, I wanted to know if any of you who own one found the same problem. |
I've owned a Carol Brass Pocket Trumpet for about 2.5 years. I use it to practice at work maybe 3 times a week, so it gets a fair amount of regular use. I use Hetman #1 valve oil.
For about the first month, the valves gave me problems, and would regularly stick. If a little oil didn't fix the problem, I'd wipe down the valves and casings with a lint-free cloth, and re-oil. After about a month, this went away. After this, the valves have worked very well.
Mike _________________ Bach Stradivarius 43* Trumpet (1974), Bach 6C Mouthpiece.
Bach Stradivarius 184 Cornet (1988), Yamaha 13E4 Mouthpiece
Olds L-12 Flugelhorn (1969), Yamaha 13F4 Mouthpiece.
Plus a few other Bach, Getzen, Olds, Carol, HN White, and Besson horns. |
|
Back to top |
|
|
yourbrass Heavyweight Member
Joined: 12 Jun 2011 Posts: 3635 Location: Pacifica, CA, USA
|
Posted: Fri Aug 01, 2014 8:54 am Post subject: |
|
|
"Today, I found that if I rotate the valves very slightly and take out any "play" with the slightly loose radial movement of the valves (like many horns have) the valves get hung up with the feeling of "metal to metal"."
Sounds like grit got in there and scored the valves/casings. Might even be a factory error. It might smooth out with use, or a light lapping of the pistons might be in order. Your repair person will know.
-Lionel _________________ "Strive for tone." -John Coppola
Edwards X-13
ACB MV3C /ACB A1/26 backbore
https://yourbrass.com/ |
|
Back to top |
|
|
gbshelbymi Heavyweight Member
Joined: 03 Jan 2013 Posts: 1032 Location: Travelers Rest, SC
|
Posted: Fri Aug 01, 2014 8:57 am Post subject: |
|
|
I had a CarolBrass 3880 cornet that, when new, would stick fairly often. Once I cleaned the valves well with detergent and a swab, then oiled them with UltraPure, they worked flawlessly. _________________ Greg
---------------------
Getzen 3850 Custom - Kanstul 1525 Flugelhorn - Getzen Severinsen Eterna LB - 70s Bach 180ML37 - 70s Bach CL 229 25C - CarolBrass Pocket - 40 Conn 80A etc. |
|
Back to top |
|
|
loweredsixth Heavyweight Member
Joined: 24 Feb 2005 Posts: 1844 Location: Fresno, California, USA, North America, Earth, Solar System, Orion Arm, Milky Way Galaxy, Universe
|
Posted: Fri Aug 01, 2014 11:32 am Post subject: |
|
|
My Carol valves were sluggish with Ultra Pure. When I started using Hetman's everything cleared up. I think I use Hetman's Light. _________________ The name I go by in the real world is Joe Lewis |
|
Back to top |
|
|
LittleRusty Heavyweight Member
Joined: 11 Aug 2004 Posts: 12663 Location: Gardena, Ca
|
Posted: Fri Aug 01, 2014 12:51 pm Post subject: |
|
|
veery715 wrote: | Give it a thorough cleaning and make sure you get inside the ports and through tubes between valves. Then use some of Flip Oakes valve oil, which is formulated with a detergent which helps to clean valves as they are breaking in. Sit with the horn and work the valves up and down while watching TV or something; clean and re-oil often and the problem should go away. |
Not sure that I would use Flip's oil on tight valves if this is true.
shofarguy wrote: | Bill,
I also get a waxy build up above the Amado key in my main tuning slide and also the water key on the bell branch of my flugelhorn. The one on the flugelhorn is hard to get with a brush snake. The trumpet tuning slide is much easier. Just brush it in a hot water stream.
I think the plug is from the small amount of paraffin that is in Flip's valve oil. Are you using his oil? Great stuff, but with my body chemistry it does form those plugs. |
That said Flip knows more about trumpets and oil than I ever will.
veery715 wrote: | Rotating valves is never a good idea. It is not necessary to do this to distribute oil as capillary action will pull the oil into the gaps. I know we often need to rotate them when inserting them to get the valve guides to snap into place, but this is the only rotation one should ever do. If the valves seem to get tight when you turn them a little, that is normal, as the wear pattern gets centered in the middle of that slack, and will be tighter at the end points. |
Didn't Reynold Schilke believe that the valve should never be rotated and when oiling never pulled out? |
|
Back to top |
|
|
chuck in ny Heavyweight Member
Joined: 23 Sep 2006 Posts: 3597 Location: New York
|
Posted: Fri Aug 01, 2014 2:33 pm Post subject: |
|
|
well. everyone gushes about carol valves so when i got my 3880 i expected super slick action. the action was adequate, and it was of course a new horn, so it was oiled and cleaned frequently. i had some valve sticking and didn't get too excited, just rinsed the valve, swabbed the casing, and re oiled.
i am using ultra pure to use up what came with the horn and thence to hetman 1 which is my normal oil. i wouldn't be surprised if the ultra pure isn't the exact medicine. it is a new cornet that is breaking in so i am not concerned how things will turn out. hopefully it's a super slick action, maybe it won't be, as long as they go up and down that will be fine. i'm a snob about a lot of things, for some reason not valves, kanstul valves are fine, carol valves are fine, the criterion is simply lack of sticking. piston valved brass make wonderful owner maintained instruments and i am very happy with the engineering.
i have heard the admonitions against valve rotation and so don't spin mine in their casings. to lionel and others, does rotating them really score them, or is this issue overstated. |
|
Back to top |
|
|
Dan O'Donnell Heavyweight Member
Joined: 01 Jan 2005 Posts: 2287
|
Posted: Sat Aug 02, 2014 12:08 pm Post subject: |
|
|
Update:
Based on your feedback (and a very kind worded PM) I decided to clean the valves and casing in order to switch from Ultra Pure to a different oil.
When I wiped the valves and casings with a white towel; there was no black residue.
I then used a mild dish soap, soaked the valves rinsed and dried them.
I switched to Zaja oil because after switching to Ultra Pure in all of my other horns; I have so much left.
So far, I am unable to replicate the failure; however, I am cautiously optimistic.
My Brass Tech. told me over the phone it sounds like I need to have the valves lapped ($66.00) however, he didn't know for sure until he inspected the valves.
We'll see...If this doesn't work out for the long run...I'll take the horn to him.
There is a good possibility that the Zaja oil being a little "thicker" just might do the trick by masking another issue.
If so; I'm curious as to why Carol Brass provides a bottle of Ultra Pure with their horns unless...mine was slightly defective from the manufacturing facility causing the need to change oils??? _________________ God Bless,
Dan O'Donnell
"Praise Him with the sound of the Trumpet:..."
Psalms 150:3 |
|
Back to top |
|
|
LittleRusty Heavyweight Member
Joined: 11 Aug 2004 Posts: 12663 Location: Gardena, Ca
|
Posted: Sat Aug 02, 2014 12:29 pm Post subject: |
|
|
Better results with a slightly thicker oil might indicate that the valves are looser than necessary.
When I brought my 72 strad to YourBrass with sticky valves thinking a lapping might help he was willing but suggested I try a thicker oil instead. The problem went away with the oil change.
Last edited by LittleRusty on Sat Aug 02, 2014 1:30 pm; edited 1 time in total |
|
Back to top |
|
|
|