View previous topic :: View next topic |
Author |
Message |
Tivolian Regular Member
Joined: 22 May 2018 Posts: 83 Location: Upstate New York
|
Posted: Fri Oct 12, 2018 8:13 am Post subject: Acid bleed, Super Olds |
|
|
Greetings. I have several spots of acid bleed around the tone ring on the bell of my Olds Super. I've read a thread or two on TH about similar issues and seen that folks recommend stripping and re-lacquering. Most of the lacquer on my horn is great, and I'd rather live with the acid bleed than re-lacquer the whole thing, but I wonder if there are ways of spot-fixing the problem. Apologies if this trivial/uninteresting for some.... and thanks. _________________ Tivolian |
|
Back to top |
|
|
shofarguy Heavyweight Member
Joined: 18 Sep 2007 Posts: 7003 Location: AZ
|
Posted: Fri Oct 12, 2018 1:58 pm Post subject: Re: Acid bleed, Super Olds |
|
|
Tivolian wrote: | Greetings. I have several spots of acid bleed around the tone ring on the bell of my Olds Super. I've read a thread or two on TH about similar issues and seen that folks recommend stripping and re-lacquering. Most of the lacquer on my horn is great, and I'd rather live with the acid bleed than re-lacquer the whole thing, but I wonder if there are ways of spot-fixing the problem. Apologies if this trivial/uninteresting for some.... and thanks. |
There really isn't a simple process to reverse the staining of what is commonly called Acid Bleed. What happens, (according to Adam Getzen, if I understand him) is that, at the end of soldering, the horn is dipped into a caustic (not acidic) bath to remove excess solder and prepare it for buffing, polishing and lacquering, However, sometimes there are voids that develop under the bell bead and retain this caustic fluid. After lacquering, the fluid leaks out and etches the metal, discoloring it. To repair the metal and remove the stain, the horn has to be stripped, the stain buffed out and polished, then the whole horn re-lacquered.
It seems to be the attitude of the brass makers I know that there is much more potential to change the horn (whether for good or ill) by trying to repair the staining, than by learning to live with the discoloration. _________________ Brian A. Douglas
Flip Oakes Wild Thing Bb Trumpet in copper
Flip Oakes Wild Thing Flugelhorn in copper
There is one reason that I practice: to be ready at the downbeat when the final trumpet sounds. |
|
Back to top |
|
|
yourbrass Heavyweight Member
Joined: 12 Jun 2011 Posts: 3619 Location: Pacifica, CA, USA
|
Posted: Sat Oct 13, 2018 3:54 pm Post subject: |
|
|
I've spot-buffed and then lacquered this kind of discoloration. There will be a color difference, and it will be larger than the original area of discoloration than the original problem. Sometimes worth it, sometimes not. _________________ "Strive for tone." -John Coppola
Edwards X-13
ACB MV3C /ACB A1/26 backbore
https://yourbrass.com/ |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|