• FAQ  • Search  • Memberlist  • Usergroups   • Register   • Profile  • Log in to check your private messages  • Log in 

1954 Mt. Vernon Bach with 43 pipe??



 
Post new topic   Reply to topic    trumpetherald.com Forum Index -> Horns
View previous topic :: View next topic  
Author Message
davenportbix
New Member


Joined: 19 Jul 2017
Posts: 2
Location: Oxford, U.K.

PostPosted: Sun Jan 12, 2020 3:57 pm    Post subject: 1954 Mt. Vernon Bach with 43 pipe?? Reply with quote

Hi all,

I'm trying to track down some additional info on a Mt. Vernon Strad - 43 bell / 43 pipe - circa 1954 that I picked up recently. Serial number begins 133**

I've emailed conn-selmer a few times but no reply AND that was a few weeks ago. Has anyone ever come across a Mt Vernon with a 43 bell and 43 pipe? It looks original? Perhaps custom order?

I'm keen to discover if it is the case that is a 43/43 - as the leadpipe needs attention (prob replacing) it is, it's a standard 43 Bell but not sure if it should a #25, #7 or #43 leadppipe. Any thoughts most welcome
_________________
Al
1953 Selmer 24B (ML Bore)
1954 Mt. Vernon Bach Strad 43 (ML Bore)
Yamaha 8310ZS - Bobby Shew model
Back to top
View user's profile Send private message
Irving
Heavyweight Member


Joined: 11 Feb 2003
Posts: 1884

PostPosted: Sun Jan 12, 2020 4:07 pm    Post subject: Reply with quote

I wouldn't worry what leadpipe was put on your horn in 1954. If your intention is to replace the leadpipe, then I would try various leadpipes, and then select the best one to have mounted. Maybe you could buy a few, try them out, and return the ones that you don't want. Even if you were to replace the leadpipe that was originally mounted with the same modern version, chances are it would be different . The receivers were different then as well. Plus you might end up preferring a different pipe.
Back to top
View user's profile Send private message
Goby
Heavyweight Member


Joined: 11 Jun 2017
Posts: 641

PostPosted: Sun Jan 12, 2020 4:52 pm    Post subject: Reply with quote

The 43 pipe didn't come around until the early 60's when Bach designed the vindabona model. Your horn would have come from the factory with a 25 pipe.
Back to top
View user's profile Send private message
sweet-ribs chamberlain
Veteran Member


Joined: 30 Oct 2007
Posts: 172
Location: Houston, TX

PostPosted: Sun Jan 12, 2020 6:09 pm    Post subject: Reply with quote

I have a Mt. Vernon C trumpet serial number 17xxx and the shop card says it has a 43 leadpipe. You might have one. I would reach out to Charlie Melk or Steve Winans and talk about their reproductions of the old pipes.

Sweet-ribs
Back to top
View user's profile Send private message
OldSchoolEuph
Heavyweight Member


Joined: 07 Apr 2012
Posts: 2426

PostPosted: Mon Jan 13, 2020 3:13 am    Post subject: Reply with quote

1954 was a very dynamic time for Bach design. Bach was building 37s in M bore as well as ML, trying different pipes, and experimenting with what was primarily the last of the classic New York wrap with its Besson inspired tuning slide arc. The leadpipe of a 1954 horn is typically not that of either a 180, or the classic Mt. Vernon short-pipe design, it is typically a late New York period pipe. So, replacement will require expert assistance if authenticity (and intonation) is the goal.

Also, call the contact number for Conn-Selmer 574-522-1675 and ask for the shop card. I have found voice works better than email with them. That will tell you what it was built with.
_________________
Ron Berndt
www.trumpet-history.com

2017 Austin Winds Stage 466
1962 Mt. Vernon Bach 43
1954 Holton 49 Stratodyne
1927 Conn 22B
1957 Holton 27 cornet
1985 Yamaha YEP-621
1975 Yamaha YEP-321 Custom
1965 Besson Baritone
1975 Olds Recording R-20
Back to top
View user's profile Send private message Visit poster's website
Irving
Heavyweight Member


Joined: 11 Feb 2003
Posts: 1884

PostPosted: Mon Jan 13, 2020 6:44 am    Post subject: Reply with quote

I wanted to reply to Old School's statement above: ". So, replacement will require expert assistance if authenticity (and intonation) is the goal."

As far as authenticity goes, well, I half agree with Old School. Unless the OP were to obtain an ORIGINAL lead pipe form the period, then I'm afraid that it wouldn't be authentic. It might be an excellent copy. We also don't know if all of the leadpipes of that year were the same, nor do we know what leadpipe was copied, referring to the available replacement leadpipes that are around now. Most importantly, we don't know how a modern copy would work on the OP's horn.

Any replacement should be tried before mounting.Which BTW doesn't tell you how the pipe will play when it is actually mounted, but at least it gives you an idea. If the OP calls Bach, maybe he could ask them if any of their own leadpipes are similar to the leadpipes of the Mt. Vernon period. He could then include that model as an example to try.

I own a 1956 Mt. Vernon, 43 bell, 25 leadpipe. The leadpipe has a long receiver, but the overall length is the same as a modern pipe. I experimented with different pipes but decided not to remove the original pipe, since it is good condition, and because I didn't want to lower the value of the horn in case I decide to sell it.

BTW, I assume that your bell is stamped 43. That doesn't imply that the leadpipe is a 43 as well. These are only part numbers. If it isn't stamped then the leadpipe is probably a 25. The shop card will clarify this.

Whatever the OP decides to do, I wish him luck!
Back to top
View user's profile Send private message
cheiden
Heavyweight Member


Joined: 28 Sep 2004
Posts: 8910
Location: Orange County, CA

PostPosted: Mon Jan 13, 2020 9:14 am    Post subject: Reply with quote

No idea about the issues associated with vintage. But I and my top pro teacher really like my contemporary 43/43. He was quite specific about liking how the big 43 pipe balances out the tight bell. When asked he suggested that I probably wouldn't like the horn nearly as much if it had a tighter pipe.
_________________
"I'm an engineer, which means I think I know a whole bunch of stuff I really don't."
Charles J Heiden/So Cal
Bach Strad 180ML43*/43 Bb/Yamaha 731 Flugel/Benge 1X C/Kanstul 920 Picc/Conn 80A Cornet
Bach 3C rim on 1.5C underpart
Back to top
View user's profile Send private message
OldSchoolEuph
Heavyweight Member


Joined: 07 Apr 2012
Posts: 2426

PostPosted: Mon Jan 13, 2020 10:51 am    Post subject: Reply with quote

cheiden wrote:
No idea about the issues associated with vintage. But I and my top pro teacher really like my contemporary 43/43. He was quite specific about liking how the big 43 pipe balances out the tight bell. When asked he suggested that I probably wouldn't like the horn nearly as much if it had a tighter pipe.


I have a classic Mt. Vernon 43 with a 25 (the shortened version) pipe. I love it - but everyone is different.

The OP should recognize that the bell thickness in 1954 was what is "lightweight" today, or lighter still. So the comparison would be a 43* with a 43 pipe.
_________________
Ron Berndt
www.trumpet-history.com

2017 Austin Winds Stage 466
1962 Mt. Vernon Bach 43
1954 Holton 49 Stratodyne
1927 Conn 22B
1957 Holton 27 cornet
1985 Yamaha YEP-621
1975 Yamaha YEP-321 Custom
1965 Besson Baritone
1975 Olds Recording R-20
Back to top
View user's profile Send private message Visit poster's website
rockford
Heavyweight Member


Joined: 03 Aug 2007
Posts: 2477
Location: Northern VA

PostPosted: Tue Jan 14, 2020 9:01 am    Post subject: Reply with quote

The only way to tell what was on the horn when it left the factory is the shop card. In the 13k range the vast majority of trumpets had 25 pipes. The 43 bell was Vincent Bach’s favorite but the 37 was so popular that he didn’t replace it altogether. In that period where he didn’t put the bell numbers on the bell they are often either a 37 or a 43. He didn’t market the difference and they were made in approximately equal numbers. I owned and played my personal 1956 Strad for 30 years assuming it was a 37. Turned out when the shop card came it was a 43. Anyway, my suggestion is, that if you basically like your trumpet don’t mess with it. With all the great custom mouthpieces available it makes a lot more sense to open throats or back bores than to screw up the finish. If you have a dissatisfaction with the instrument it may have nothing to do with the leadpipe. It could be a valve alignment or removal of an internal solder blob or build up crud hiding in there somewhere could be the problem.
_________________
Bill Siegfried
NY/Mt. Vernon Bach trumpets. Yamaha flugelhorn and piccolo A/Bb, Monette and Hammond mouthpieces. Fender and Peavey Cirrus Bass Guitars. Ampeg and Genz-Benz amps. Embraer 170/175/190.
Back to top
View user's profile Send private message
James Becker
Heavyweight Member


Joined: 02 Sep 2005
Posts: 2827
Location: Littleton, MA

PostPosted: Tue Jan 14, 2020 10:38 am    Post subject: Reply with quote

Rockford makes an excellent argument to work with what you already have.

In addition to valve alignment, we can evaluate everything else including measuring for receiver wear, valve seal, removal of perturbations, be it excess solder, burrs, pinched bore cross section. Addressing all the above can render a trumpet into an excellent player. We call this blueprinting and you can read more about this service on our website.

We’re available to provide our free diagnostics and estimates in order to gather much needed information to make your decision whether to proceed.

I hope this is helpful.
_________________
James Becker
Brass Repair Specialist Since 1977
Osmun Music Inc.
77 Powdermill Road Rt.62
Acton, MA 01720
www.osmun.com

Our workshop is as close as your nearest UPS store https://www.ups.com/dropoff?loc=en_US
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
James Becker
Heavyweight Member


Joined: 02 Sep 2005
Posts: 2827
Location: Littleton, MA

PostPosted: Tue Jan 14, 2020 11:20 am    Post subject: Reply with quote

I’d like to add, trumpets from that era will have measurable wear. So if valves leak and mouthpiece engagement is past the minimum threshold it will not play nearly as efficiently as it should. Restoration of valve seal and proper mouthpiece gap can make a world of difference for the better.
_________________
James Becker
Brass Repair Specialist Since 1977
Osmun Music Inc.
77 Powdermill Road Rt.62
Acton, MA 01720
www.osmun.com

Our workshop is as close as your nearest UPS store https://www.ups.com/dropoff?loc=en_US
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
Display posts from previous:   
Post new topic   Reply to topic    trumpetherald.com Forum Index -> Horns All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group