• FAQ  • Search  • Memberlist  • Usergroups   • Register   • Profile  • Log in to check your private messages  • Log in 

trpt valve block for a flugelhorn?



 
Post new topic   Reply to topic    trumpetherald.com Forum Index -> Horns
View previous topic :: View next topic  
Author Message
boppin' bob
New Member


Joined: 05 Jan 2020
Posts: 4

PostPosted: Wed Mar 25, 2020 11:52 am    Post subject: trpt valve block for a flugelhorn? Reply with quote

I am trying to salvage a Yamaha Flugelhorn that has a badly damaged valve block - not repairable, replaceable or playable. Before it goes for scrap, I wonder if a Bb trpt valve block would work in place of the damaged valves? I realize that the flugel mouthpipe enters the first valve and the trumpet mouthpipe enters the third valve. Does that make a difference even if the tubing were to be rerouted? I'd appreciate any insight from anyone who reconstructs/refurbishes brass instruments.
Back to top
View user's profile Send private message
trompette229
Veteran Member


Joined: 21 Mar 2016
Posts: 203

PostPosted: Wed Mar 25, 2020 12:00 pm    Post subject: Reply with quote

Yes, it will work. It doesn't matter which entry point. The difference some may point out is the bore...flugels generally being smaller. Yamaha's student flugelhorn is actually a ML bore and plays great so it can and has been done. They use the same valve block/section as the the student trumpets.
Back to top
View user's profile Send private message
lipshurt
Heavyweight Member


Joined: 24 Feb 2008
Posts: 2641
Location: vista ca

PostPosted: Wed Mar 25, 2020 3:20 pm    Post subject: Reply with quote

the yam student flug actually has a trumpet valve block
_________________
Mouthpiece Maker
vintage Trumpet design enthusiast
www.meeuwsenmouthpieces.com
www.youtube.com/lipshurt
Back to top
View user's profile Send private message Visit poster's website
James Becker
Heavyweight Member


Joined: 02 Sep 2005
Posts: 2827
Location: Littleton, MA

PostPosted: Thu Mar 26, 2020 6:42 am    Post subject: Reply with quote

Two observations about the YFH-231.

Does anyone here know the exact bore size? I cannot find it’s specifications online, but I don’t believe it’s ML .460”.

Second, the 3rd valve slide needs to be very short draw or it won’t clear the bell. I know this because I was asked to convert the 3rd slide into an action slide, not easily done because of this. Come to think of it that’s when I realized the tubing size was not the same as a YTR-2320.

You would have thought this was a safe assumption, but it wasn’t.

The Getzen Capri flugelhorn on the other hand shares the identical valve set and slides as the Capri trumpet valve block. With its much wider wrap there’s no clearance issues with the bell.

Good luck!
_________________
James Becker
Brass Repair Specialist Since 1977
Osmun Music Inc.
77 Powdermill Road Rt.62
Acton, MA 01720
www.osmun.com

Our workshop is as close as your nearest UPS store https://www.ups.com/dropoff?loc=en_US
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
Turkle
Heavyweight Member


Joined: 29 Apr 2008
Posts: 2450
Location: New York City

PostPosted: Thu Mar 26, 2020 7:07 am    Post subject: Reply with quote

James Becker wrote:
Two observations about the YFH-231.

Does anyone here know the exact bore size? I cannot find it’s specifications online, but I don’t believe it’s ML .460”.

Second, the 3rd valve slide needs to be very short draw or it won’t clear the bell. I know this because I was asked to convert the 3rd slide into an action slide, not easily done because of this. Come to think of it that’s when I realized the tubing size was not the same as a YTR-2320.

You would have thought this was a safe assumption, but it wasn’t.

The Getzen Capri flugelhorn on the other hand shares the identical valve set and slides as the Capri trumpet valve block. With its much wider wrap there’s no clearance issues with the bell.

Good luck!


My understanding is that my old YFH-231 is a "medium bore," .445. I don't have any way of measuring that with calipers or anything.
_________________
Yamaha 8310Z trumpet
Yamaha 8310Z flugel
Curry 3.
Back to top
View user's profile Send private message
Tony Scodwell
Heavyweight Member


Joined: 17 Oct 2005
Posts: 1954

PostPosted: Thu Mar 26, 2020 8:36 am    Post subject: Flugel with trumpet valves Reply with quote

In the mid sixties I was playing Getzen trumpets and spent a lot of time at the factory between road trips. Sandy Sandberg was the main sales/pro rep and was responsible for getting Doc Severinsen on board with the Eterna Severinsen project. I had mentioned to Sandy that Yamaha had just come out with this student flugel and it played quite well albeit with a bit "lighter" sound quality. I asked Sandy if their shop forman Merle Heuerman and I could take the existing Eterna bell and leadpipe and use their excellent .460 valve section from the Eterna trumpet (same as the Capri) and come up with a comparable student flugelhorn within the Capri line. We did and Getzen kept that model flugelhorn in the line-up until last year and Yamaha has also dropped their model as well.

Knowing how well those horns played I felt the time may be right for my little company, Scodwell USA to re-introduce a similar flugelhorn at an affordable price for the occasional use by trumpet players not needing a $3000 horn. I have mine listed at the moment on the Marketplace and my website where you can see photos of it. Plans to exhibit at ITG this years with this "Euro" model flugel and all my other instruments were cancelled for obvious reasons and hopefully this serious crisis will be solved in the near future.

Tony Scodwell
www.scodwellusa.com
Back to top
View user's profile Send private message
trompette229
Veteran Member


Joined: 21 Mar 2016
Posts: 203

PostPosted: Thu Mar 26, 2020 11:34 am    Post subject: Reply with quote

My mistake on the ML bore, it is indeed a .445 bore
I found specs on a couple websites and compared it with a 9830 and 9610, all identical.

James Becker wrote:
Two observations about the YFH-231.

Does anyone here know the exact bore size? I cannot find it’s specifications online, but I don’t believe it’s ML .460”.

Second, the 3rd valve slide needs to be very short draw or it won’t clear the bell. I know this because I was asked to convert the 3rd slide into an action slide, not easily done because of this. Come to think of it that’s when I realized the tubing size was not the same as a YTR-2320.

You would have thought this was a safe assumption, but it wasn’t.

The Getzen Capri flugelhorn on the other hand shares the identical valve set and slides as the Capri trumpet valve block. With its much wider wrap there’s no clearance issues with the bell.

Good luck!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    trumpetherald.com Forum Index -> Horns All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group