View previous topic :: View next topic |
Author |
Message |
Beyond16 Veteran Member
Joined: 07 Jan 2020 Posts: 220 Location: Texas Gulf Coast
|
Posted: Tue Jan 11, 2022 10:17 pm Post subject: Olds Recording restoration pictures |
|
|
I have left most my horns unrestored, except for dent removal. An exception is this Olds Recording trumpet. Of two I owned, this one had the best valves. I sold the other one. This one had bad pitting in the hand areas. Because this model isn't plated, removing the pitting is possible. The bell was scratched right on top of the engraving, so those scratches had to be left. The original shopgoodwill pictures are here. Close up of the pitting:
To remove the pitting, I wet sanded with 400 grit paper. I like to buy American (3M). But I found some Japanese made paper (see pics) that is both more durable and lower cost than 3M. Here are pictures after the 400 grit. The difficult part was removing pitting from the serial number area without affecting the digits:
All the real pitting removal work was done with the 400 paper. Next is 800 grit:
Next is 1500 grit. The engraving was not sanded until the next step:
Next is 2500 grit. 2500 grit is about as fine as polish. Going directly from 1500 to polishing works well too. The 2500 paper leaves a pretty good shine:
Red rouge was used for final polish. Polishing was done by hand, using strips of cloth (from twilltape.com) with red rouge rubbed on:
Some scratches had to be left to preserve the engraving:
The pitting is completely gone from the second valve slide, and pretty much everywhere else:
I had planned to lacquer this horn. But the lacquer I bought was for medium temperature and dried too fast when I tested it this summer. So I decided to keep it raw brass. Imagine messing up the lacquer and having to redo it. That would be a huge mess. In addition, I wanted to get the vintage look back, just without the pitting. I left it out in the open in the garage all summer. Here is what it looks like now:
Surprising that high copper bell held its shine. A fingerprint becomes permanent unless wiped off immediately. I actually bought a bunch of chemicals to make patina with. I haven't tried them out yet. |
|
Back to top |
|
|
homebilly Heavyweight Member
Joined: 24 Dec 2010 Posts: 2196 Location: Venice, CA & Paris, France
|
Posted: Wed Jan 12, 2022 2:01 am Post subject: |
|
|
excellent work _________________ ron meza (deadbeat jazz musician) & (TH 5 post ghost neighborhood watch ringleader)
waiting for Fed-Ex to deliver a $50 trumpet to my door. shipping was prepaid by seller of course!
http://ronmeza.com
http://highdefinitionbigband.com |
|
Back to top |
|
|
JonathanM Heavyweight Member
Joined: 25 Aug 2007 Posts: 2018 Location: Charleston, SC
|
Posted: Wed Jan 12, 2022 3:32 am Post subject: |
|
|
Very impressive!! I can’t wait to see the pics on my computer, but the phone sized pics look great!
I feel like I can clean a horn quite well, but beyond that, my skills make me dangerous. I’d love to have a nice, big electric buffer with the attachments for horn… But work like yours might be better for me.
My .02, but as nice as it looks, I’d have it lacquered. _________________ Jonathan Milam
Trumpets: 18043B, 18043*, 18043 Sterling Silver +, 18037 SterlingSilver+, Benge 4x, Olds: '34 Symphony, '47 Super, '52 Recording
Flugle: Strad 182
Puje: American Belle
Cornet: Olds Recording & Super |
|
Back to top |
|
|
Yamahaguy Heavyweight Member
Joined: 09 Dec 2004 Posts: 3992
|
Posted: Wed Jan 12, 2022 10:07 am Post subject: |
|
|
Very nice!! |
|
Back to top |
|
|
Jim19043 Veteran Member
Joined: 03 Feb 2020 Posts: 107 Location: Los Angeles
|
Posted: Wed Jan 12, 2022 10:30 am Post subject: |
|
|
Beyond 16: This is so cool! Thanks for taking the time and care to photograph and describe each step of the pitting-removal process, and specifying the materials you used. _________________ Jim19043
1998 Bach Strad L180S72
GR 3MX |
|
Back to top |
|
|
taylordiving Regular Member
Joined: 27 Jan 2013 Posts: 66
|
Posted: Thu Jan 13, 2022 5:35 pm Post subject: |
|
|
Man do you know what you're doing, that axe looks awesome! _________________ Calicchio 1s7
Yamaha 8310Z
Reynolds Leonard Smith Contempora
1941 & 1942 Olds Supers
Getzen Eterna Cornet
Yamaha 8315G Flugel |
|
Back to top |
|
|
|