| View previous topic :: View next topic |
| Author |
Message |
LaTrompeta
Heavyweight Member
Joined: 03 May 2015
Posts: 848
Location: West Side, USA
|
|
| Back to top |
|
 |
dstpt
Heavyweight Member
Joined: 14 Dec 2005
Posts: 1245
|
 Posted: Fri Sep 15, 2023 12:32 pm Post subject: |
 |
|
Interestingly, the silver plated one pictured has a left thumb actuator to lower the pitch on notes using the 3rd and 4th valves. If you click on the picture of the lacquered version at the bottom of the page, you'll see that an additional con-rod (connection rod) "branch" to a main tuning slide that is strategically placed directly prior to the bell. This is their version of a "pitchfinder," enabling the player to tune down any note and is a feature on many of their rotary trumpets and flugelhorns.
I played one with the Eb setup at TMEA 2020 and found that the low Eb was noticeably sharp. (I'm referring to the concert Gb a minor 3rd below A440.) I thought that that was odd for a 2-3 fingering. Of course, you can easily trigger that note down. My guess is a player would need to spend time finding the ideal placement for all of the slides as you move from playing in the three available keys of E, Eb, and D. |
|
| Back to top |
|
|
Halflip
Heavyweight Member
Joined: 09 Jan 2003
Posts: 1698
Location: WI
|
| Posted: Fri Sep 15, 2023 1:51 pm Post subject: |
|
|
As an ex-French horn player, this one makes my mouth water too:
https://thein-brass.de/en/instrument/r-model-in-f-bb/
Wildest, sexiest horn wrap I've ever seen!
_________________
"He that plays the King shall be welcome . . . " (Hamlet Act II, Scene 2, Line 1416)
"He had no concept of the instrument. He was blowing into it." -- Virgil Starkwell's cello teacher in "Take the Money and Run" |
|
| Back to top |
|
|
LittleRusty
Heavyweight Member
Joined: 11 Aug 2004
Posts: 12551
Location: Gardena, Ca
|
|
| Back to top |
|
|
Man Of Constant Sorrow
Veteran Member
Joined: 25 Jun 2023
Posts: 223
|
| Posted: Fri Sep 15, 2023 3:48 pm Post subject: |
|
|
Yes ! V unusual !
(I am a former Hornist, as well  )
_________________
Sub-Optimal Hillbilly Jazz |
|
| Back to top |
|
|
kehaulani
Heavyweight Member
Joined: 23 Mar 2003
Posts: 8664
Location: Hawai`i - Texas
|
|
| Back to top |
|
|
ProAm
Heavyweight Member
Joined: 05 Feb 2008
Posts: 935
|
|
| Back to top |
|
|
Destructo
Veteran Member
Joined: 18 Apr 2022
Posts: 130
|
| Posted: Fri Sep 15, 2023 9:33 pm Post subject: |
|
|
Don't be posting this horn on here. Every time I see one, it just makes me sad that I can't afford to buy one.  |
|
| Back to top |
|
|
JHirakawa
Veteran Member
Joined: 11 Mar 2022
Posts: 152
|
| Posted: Tue Sep 26, 2023 6:56 pm Post subject: |
|
|
My horn tech showed me this trumpet. It's a newer version. Depress the 4th valve (hold it down) and you bypass the tubing for that valve, lowering the pitch.
_________________
Kanstul FB Classic b-flat&C
'42 Buescher 205
'45 Martin Committee
'48 Chi Benge
'47 Conn 22b
'69 Olds Custom Crafted
'47 Holton 48
'64 Bach Strad Cornet
'62 Olds Spl Cornet
'64 Conn 80a
'54 Conn 34a
Benge flugel
Olds, DEG Bugles |
|
| Back to top |
|
|
sd4f
Regular Member
Joined: 30 Dec 2009
Posts: 98
Location: Australia
|
| Posted: Wed Sep 27, 2023 9:20 am Post subject: |
|
|
I watched David Hickman's video some time ago, and I just felt a lot of the time "a solution looking for a problem". I haven't played other brass instruments with a fourth valve, except for euphonium and piccolo trumpet, let alone a "5 valve" instrument.
The euphonium was compensated, so the fourth valve was generally in tune, where it extended the range, and could be used as an alternative fingering.
Piccolo trumpet fourth slides need to be adjusted to where you want it to work, it can't do everything at once, that is, if you need it to extend your range, that's it, you won't be using it as an alternative fingering option.
At the end of the day, that's my opinion, but I guess if transposing can be a bit of a problem, a slightly off note is probably better than a wrong one, and I guess with some work, everything can be worked around. |
|
| Back to top |
|
|
LaTrompeta
Heavyweight Member
Joined: 03 May 2015
Posts: 848
Location: West Side, USA
|
| Posted: Wed Sep 27, 2023 9:23 am Post subject: |
|
|
The Blackburn is beautiful, no doubt, but it looks a little unwieldy to me.
_________________
Please join me as well at:
https://trumpetboards.com |
|
| Back to top |
|
|
etc-etc
Heavyweight Member
Joined: 19 Jan 2008
Posts: 6103
|
| Posted: Thu Sep 28, 2023 3:48 pm Post subject: |
|
|
| I think a different direction of development might be more successful. Something along the lines of the double French horn, but with the second set of tubing offset by 1/2 tone only. Will be monster heavy. |
|
| Back to top |
|
|
Brassnose
Heavyweight Member
Joined: 07 Mar 2016
Posts: 1828
Location: Germany
|
| Posted: Thu Sep 28, 2023 7:53 pm Post subject: |
|
|
You talking about this (conceptually)? http://www.hm-trompeten.de/do/do_do.htm
_________________
2019 Martin Schmidt eXcellence
1992 Bach 43GH/43
1989 Kühnl & Hoyer Model 15 flugel
1980/2023 Custom Blessing Scholastic C 😎
1977 Conn 6B
196x/7x Hüttl Silver Colibri 69
1951 Buescher 400 Lightweight
AR Resonance/Klier/Curry |
|
| Back to top |
|
|
LaTrompeta
Heavyweight Member
Joined: 03 May 2015
Posts: 848
Location: West Side, USA
|
| Posted: Fri Sep 29, 2023 6:51 am Post subject: |
|
|
That's a fascinating development. The rotary valve on the bell is very, very intriguing.
_________________
Please join me as well at:
https://trumpetboards.com |
|
| Back to top |
|
|
ProAm
Heavyweight Member
Joined: 05 Feb 2008
Posts: 935
|
| Posted: Fri Sep 29, 2023 9:44 am Post subject: |
|
|
| JHirakawa wrote: | | My horn tech showed me this trumpet. It's a newer version. Depress the 4th valve (hold it down) and you bypass the tubing for that valve, lowering the pitch. |
If you bypass tubing aren’t you raising the pitch?
Usually you take a horn pitched in C and add a valve to raise into D when desired. Wasn’t that a Voisin trick?
While I am a Blackburn fan and own quite a few, that 4-valve combo is just too much for me. I’m sure that it is done as well as can be done, though. |
|
| Back to top |
|
|
etc-etc
Heavyweight Member
Joined: 19 Jan 2008
Posts: 6103
|
| Posted: Fri Sep 29, 2023 1:07 pm Post subject: |
|
|
Yes, that is correct!
Link to the photo of the C/G trumpet that you referred to (image does not show in TH but the link leads to it):
http://www.hm-trompeten.de/do/dpp_450.jpg |
|
| Back to top |
|
|
LittleRusty
Heavyweight Member
Joined: 11 Aug 2004
Posts: 12551
Location: Gardena, Ca
|
| Posted: Fri Sep 29, 2023 1:46 pm Post subject: |
|
|
| ProAm wrote: | | JHirakawa wrote: | | My horn tech showed me this trumpet. It's a newer version. Depress the 4th valve (hold it down) and you bypass the tubing for that valve, lowering the pitch. |
If you bypass tubing aren’t you raising the pitch?
Usually you take a horn pitched in C and add a valve to raise into D when desired. Wasn’t that a Voisin trick?
While I am a Blackburn fan and own quite a few, that 45-valve combo is just too much for me. I’m sure that it is done as well as can be done, though. |
5
I really don’t have any idea how the Voisin trick was done. But it would make more sense to take a D and add length with the valve to lower it to C. After all that way you could pull the valve slides to bring the fingered notes into tune. |
|
| Back to top |
|
|
ProAm
Heavyweight Member
Joined: 05 Feb 2008
Posts: 935
|
| Posted: Fri Sep 29, 2023 3:31 pm Post subject: |
|
|
| LittleRusty wrote: | | ProAm wrote: | | JHirakawa wrote: | | My horn tech showed me this trumpet. It's a newer version. Depress the 4th valve (hold it down) and you bypass the tubing for that valve, lowering the pitch. |
If you bypass tubing aren’t you raising the pitch?
Usually you take a horn pitched in C and add a valve to raise into D when desired. Wasn’t that a Voisin trick?
While I am a Blackburn fan and own quite a few, that 45-valve combo is just too much for me. I’m sure that it is done as well as can be done, though. |
5
I really don’t have any idea how the Voisin trick was done. But it would make more sense to take a D and add length with the valve to lower it to C. After all that way you could pull the valve slides to bring the fingered notes into tune. |
Yes, you are correct. The basic horn is in D, the valve controls the length of tubing that changes the horn to C. I always assumed that the default engaged the extra tubing and gave a horn pitched in C with no valves depressed. You depressed the fourth valve to remove the extra tubing, putting the base pitch in D. I will readily admit that I am likely wrong (as I was with the Blackburn horn, looking only at piston valves, forgetting the rotary one). |
|
| Back to top |
|
|
LittleRusty
Heavyweight Member
Joined: 11 Aug 2004
Posts: 12551
Location: Gardena, Ca
|
| Posted: Fri Sep 29, 2023 6:22 pm Post subject: |
|
|
I have the Kanstul 1520 picc. It has three sets of slides and three bells that allow it to be played in G, A and Bb. It isn’t a quick change so I would only switch at an intermission if I wanted multiple keys in one performance.
It also has a fourth valve that has a trill crook, an extension that will lower by a fourth and some other pitch if the trill crook is used instead of the fourth crook on the extension.
That is where I think the Blackburn would shine. You can hot swap the fundamental pitch on the fly, even in a single phrase.
Having this experience is why I commented on your post. Interestingly enough the second valve crook is not removable. |
|
| Back to top |
|
|
Andy Del
Heavyweight Member
Joined: 30 Jun 2005
Posts: 2623
Location: sunny Sydney, Australia
|
| Posted: Sat Sep 30, 2023 1:02 pm Post subject: |
|
|
Yep. Still use it as my everyday C trumpet. With the large bell, in D it’s an amazing D trumpet. 0us, of all my Eb instruments, this is the one which sings to best. I also have a piccolo and a corno da caccia. Cant beat ‘em!
Visiting Thein 11 (!) years ago, I played some of the best trumpets I have ever gotten my mits on. Their 4 valve Bb rotary is like a force of nature, and their version of a Schilke E3L a revelation. Even the prototype C piccolo was sublime.
There are other makers out there, but they do seem to be able to pull amazing instruments out of their hats time and again.
Cheers
Andy
_________________
so many horns, so few good notes... |
|
| Back to top |
|
|
|
