View previous topic :: View next topic |
Author |
Message |
botahoratiu Veteran Member
Joined: 20 Jul 2010 Posts: 390 Location: Medias, Romania
|
Posted: Sat Jan 13, 2018 3:12 am Post subject: Low Alpha Shallow Piece |
|
|
Hi
Does anyone know a low alpha angle shallow piece in the 1-3 range? I currently play Warburtons and have a 3S in my collection, but would like more of a drop into the cup. On the Kanstul mouthpiece comparator, the only one that seems like that is the 1S. Does anyone have an experience with this one? Or anything else in this 3-1 rim range. I like the warburton rims. Don't bother to mention Jet-tone's because as far as I know, they have a high point farther away from the cup, wich doesn't work for me. I have a lot of lip protrusion, when I play. (I even tried once a Jettone E.Merian ... don't remember the other parameters ... and it didn't worked)
Thank you very much.
Horatiu _________________ Getzen Eterna 900s
Yamaha Bobby Shew Lead |
|
Back to top |
|
|
BRM2 Regular Member
Joined: 03 Mar 2007 Posts: 73 Location: North Carolina
|
Posted: Sat Jan 13, 2018 5:19 am Post subject: |
|
|
I know exactly what you are going through. I also own the Warburton 3S, SV, and ESV cups.
Check out Curry Z cups, Reeves S cups, Hammond S cups, and GR C-TZ cups. These have lower alpha angles to me in comparison to Shilke A4a cups and other lead mouthpieces. Rims should also be similar depending on which size you are looking at.
If you can handle shallower and tighter pieces, check out Marcinkiewicz E10 B. Findley and E13 C.Findley mouthpieces.
If you want a flat bottom cups, the Curry 600 M cups are also a good choice. The time are more rounded though.
Despite playing the E13 C. Findley for all my playing, I still have some lip protrution into the mouthpiece and struggle with other shallow pieces. _________________ BRM
Van Laar Chuck Findley(silver)
CarolBrass 5000L YST
Marcinkiewicz E13 C. FINDLEY
Lotus 2M (Bronze)
GR 67MS |
|
Back to top |
|
|
botahoratiu Veteran Member
Joined: 20 Jul 2010 Posts: 390 Location: Medias, Romania
|
Posted: Sat Jan 13, 2018 5:39 am Post subject: |
|
|
Hi. How does all compare to the Warburton 3S ? I mean the alpha angle. The 3S has an anpha angle that is a bit still too high for me. _________________ Getzen Eterna 900s
Yamaha Bobby Shew Lead |
|
Back to top |
|
|
B. Scriver Heavyweight Member
Joined: 14 Jan 2002 Posts: 1204 Location: Toronto, Canada
|
Posted: Sat Jan 13, 2018 5:57 am Post subject: |
|
|
Try the GR M65.6S, or our 66S-B and 67S-B. The 67CT-Z suggestion is a good one as well.
Brian Scriver
www.grmouthpieces.com |
|
Back to top |
|
|
BRM2 Regular Member
Joined: 03 Mar 2007 Posts: 73 Location: North Carolina
|
Posted: Sat Jan 13, 2018 7:15 am Post subject: |
|
|
The GR C-TZ cup definitely.
Next the Marcinkiewicz E10 B. Findley. However, it is pretty shallow and has a tighter throat and backbore than your Warburton.
Maybe the Curry 600 series M cup.
It might be better to just have Warburton create a lower angle on your current 3S....? Might be cheaper too?.... _________________ BRM
Van Laar Chuck Findley(silver)
CarolBrass 5000L YST
Marcinkiewicz E13 C. FINDLEY
Lotus 2M (Bronze)
GR 67MS
Last edited by BRM2 on Sat Jan 13, 2018 7:33 am; edited 1 time in total |
|
Back to top |
|
|
botahoratiu Veteran Member
Joined: 20 Jul 2010 Posts: 390 Location: Medias, Romania
|
Posted: Sat Jan 13, 2018 7:20 am Post subject: |
|
|
But the CT-Z has a #3 backbore and is a pretty free blowing piece. I would like something with more than middle resistance _________________ Getzen Eterna 900s
Yamaha Bobby Shew Lead |
|
Back to top |
|
|
botahoratiu Veteran Member
Joined: 20 Jul 2010 Posts: 390 Location: Medias, Romania
|
Posted: Sat Jan 13, 2018 7:21 am Post subject: |
|
|
Never played Marcinkiewicz... how's the rim? _________________ Getzen Eterna 900s
Yamaha Bobby Shew Lead |
|
Back to top |
|
|
BRM2 Regular Member
Joined: 03 Mar 2007 Posts: 73 Location: North Carolina
|
Posted: Sat Jan 13, 2018 7:53 am Post subject: |
|
|
The Marcinkiewicz rims are all different and based on each particular mouthpiece. In comparison to the Warburton 3S, it feels very similar in size on my chops with the only difference being the more rounded outer rim. I only felt a difference when i applied excessive pressure though.
Again, this piece will be more resistant than your Warburton. With a cup depth closer to a Warburton ESVcup. _________________ BRM
Van Laar Chuck Findley(silver)
CarolBrass 5000L YST
Marcinkiewicz E13 C. FINDLEY
Lotus 2M (Bronze)
GR 67MS |
|
Back to top |
|
|
maynard-46 Heavyweight Member
Joined: 25 Oct 2002 Posts: 1845 Location: GEORGIA
|
Posted: Sat Jan 13, 2018 8:01 am Post subject: Low Alpha Shallow Piece |
|
|
The Reeves' "D" cup is exactly what ur looking for. More cup volume so u don't bottom out...more undercut...and lower alpha angle.
Butch _________________ TRUMPE: YAMAHA Lacq. "Shew Gen II" / Legends .585 "CatMaster" Top / KT "TKO" BB / Reeves #5.75 Sleeve.
FLUGELHORN: ADAMS Custom "F1" / Legends .585 "CatMaster FL. |
|
Back to top |
|
|
razeontherock Heavyweight Member
Joined: 05 Jun 2004 Posts: 10609 Location: The land of GR and Getzen
|
Posted: Sat Jan 13, 2018 9:04 am Post subject: |
|
|
Curry's ZM cup, just marked Z, gives what you want without being too expensive. You can get it in a top only and use it with your current backbore. |
|
Back to top |
|
|
John Mohan Heavyweight Member
Joined: 13 Nov 2001 Posts: 9830 Location: Chicago, Illinois
|
Posted: Sat Jan 13, 2018 12:05 pm Post subject: |
|
|
razeontherock wrote: | Curry's ZM cup, just marked Z, gives what you want without being too expensive. You can get it in a top only and use it with your current backbore. |
I think you made a typo in your reply.
The ZM is just marked "M". The Z cup is a shallower model than the ZM (M).
From the Curry Website:
Quote: | ZM Cup: The Curry ZM cup (usually marked "M" on the mpc.) has proven to be an excellent "crossover" mouthpiece for those players who need to play both classical and jazz. Slightly shallower than the C cup, it's medium cup has enough tone to satisfy most classical needs, yet is bright enough to play parts in a big band. |
|
|
Back to top |
|
|
B. Scriver Heavyweight Member
Joined: 14 Jan 2002 Posts: 1204 Location: Toronto, Canada
|
Posted: Sat Jan 13, 2018 2:38 pm Post subject: |
|
|
But the CT-Z has a #3 backbore and is a pretty free blowing piece. I would like something with more than middle resistance
The 67CT-Z has a #1BB. The alpha angle is not low. Rather, it's lower than very high alpha angles that the OP is trying to get away from, typically associate with the lead type mouthpieces. The 67CT-Z is extremely popular for large diameter players that need to switch venues like Orchestral to Big Band lead. Or Orchestral to a movie sound track.
The 67CT-Z design may feel more open, it's not from the backbore. If you are using the alpha angle to create compression, you reduce the alpha angle, the resistance drops. It has to be a match with the player. You could take the same player and put them on different type trumpets with the 67CT-Z. One would work really well and one would not be resistant enough or too resistant. This is player specific. See GR Rule #3. The player, mouthpiece, and instrument must be a match. If one is changed the others must be able to accommodate the change or be changed as well.
When you drop the alpha angle to accommodate more lip engagement you can go too far and lose the compression.
We make a 66L-Z (L alpha angle and Z bottom) if you are looking for a low alpha angle and the Z type cup. It is special order.
There are other problems with an alpha that is too low. I can experience the dreaded (Fracking or note fracturing). Too high the note or air will stop. If that high alpha angle just touches the lip the vibrations can stop yet you might still hear some air moving. If the air stops, vibration stops.
Gary Radtke
www.grmouthpieces.com |
|
Back to top |
|
|
Al Innella Heavyweight Member
Joined: 08 Jul 2008 Posts: 755 Location: Levittown NY
|
Posted: Sun Jan 14, 2018 7:31 am Post subject: |
|
|
Give the Warburton anchor grip top a try. I had problems playing his SV standard top,I needed a little more room for my lip. The anchor grip top gave me more lip room without having to go to a deeper cup.
The rim has a different feel, but it's definitely worth a try. |
|
Back to top |
|
|
GordonH Heavyweight Member
Joined: 16 Nov 2002 Posts: 2893 Location: Edinburgh, Scotland
|
Posted: Mon Jan 15, 2018 4:27 am Post subject: |
|
|
Monette made me one it was called a B1-5LDDD if I remember correctly. It was designed for Scotty Barnhart. Imagine a lead mouthpiece with a bit of extra cylindrical section at the top for lip room. It worked very well but I no longer have it as it was specifically for the P3 trumpet that went in my divorce! _________________ Bb - Scherzer 8218W, Schilke S22, Bach 43, Selmer 19A Balanced
Pic - Weril
Flugel - Courtois 154
Cornet - Geneva Heritage, Conn 28A
Mouthpieces - Monette 1-5 rims and similar.
Licensed Radio Amateur - GM4SVM |
|
Back to top |
|
|
botahoratiu Veteran Member
Joined: 20 Jul 2010 Posts: 390 Location: Medias, Romania
|
Posted: Mon Jan 15, 2018 10:14 am Post subject: |
|
|
Ok, thank you for all the replies, but is there any stock mouthpiece that has that cylindrical section in the top of the cup, without going custom? I mean ... does anybody know how a 67S-B, or a Curry Star or another one compares to my Warburton 3S regarding the alpha angle and the shallowness? would really like to find a shallow-flat bottom cup-low alpha angle mouthpiece _________________ Getzen Eterna 900s
Yamaha Bobby Shew Lead |
|
Back to top |
|
|
botahoratiu Veteran Member
Joined: 20 Jul 2010 Posts: 390 Location: Medias, Romania
|
Posted: Mon Jan 15, 2018 10:16 am Post subject: |
|
|
Had anybody tried the Warburton 1S? is it that big of a diameter? (in any other terms, it would look to me perfect from the Kanstul comparator) _________________ Getzen Eterna 900s
Yamaha Bobby Shew Lead |
|
Back to top |
|
|
Al Innella Heavyweight Member
Joined: 08 Jul 2008 Posts: 755 Location: Levittown NY
|
Posted: Mon Jan 15, 2018 11:17 am Post subject: |
|
|
botahoratiu wrote: | Ok, thank you for all the replies, but is there any stock mouthpiece that has that cylindrical section in the top of the cup, without going custom? I mean ... does anybody know how a 67S-B, or a Curry Star or another one compares to my Warburton 3S regarding the alpha angle and the shallowness? would really like to find a shallow-flat bottom cup-low alpha angle mouthpiece |
The Warburton anchor grip tops are stock mouthpieces,so if you like the Warburton 3S standard top,but need more lip room, try the 3S anchor grip top.It's the same ID,same depth,but more lip room (different alpha angle),and you can use your old back bore. |
|
Back to top |
|
|
TKSop Heavyweight Member
Joined: 23 Feb 2014 Posts: 1735 Location: UK
|
Posted: Mon Jan 15, 2018 11:24 am Post subject: |
|
|
Al Innella wrote: | botahoratiu wrote: | Ok, thank you for all the replies, but is there any stock mouthpiece that has that cylindrical section in the top of the cup, without going custom? I mean ... does anybody know how a 67S-B, or a Curry Star or another one compares to my Warburton 3S regarding the alpha angle and the shallowness? would really like to find a shallow-flat bottom cup-low alpha angle mouthpiece |
The Warburton anchor grip tops are stock mouthpieces,so if you like the Warburton 3S standard top,but need more lip room, try the 3S anchor grip top.It's the same ID,same depth,but more lip room (different alpha angle),and you can use your old back bore. |
Al,
For my curiousity... do you have a source for the undercut (alpha angle) being different?
I was under the impression (I haven't used/owned one for several years now) that the only difference was the outer shape (the french-cut style rim that's very thin vertically on the outside).
I'm pretty sure from experience that that outer shape can help anchor the lips out of the cup a bit more, which might create the illusion of there being more chop space... but the alpha angle is an internal thing, so presumably that's the same?
At any rate - wouldn't this would kinda agree with what Warburton's own website claims?
|
|
Back to top |
|
|
Al Innella Heavyweight Member
Joined: 08 Jul 2008 Posts: 755 Location: Levittown NY
|
Posted: Mon Jan 15, 2018 2:51 pm Post subject: |
|
|
I don't have a source for the under cut.All I know is that I had issues with the standard top cup,and no issues with the same depth anchor grip top. |
|
Back to top |
|
|
BRM2 Regular Member
Joined: 03 Mar 2007 Posts: 73 Location: North Carolina
|
Posted: Tue Jan 16, 2018 3:57 pm Post subject: |
|
|
botahoratiu wrote: | Ok, thank you for all the replies, but is there any stock mouthpiece that has that cylindrical section in the top of the cup, without going custom? I mean ... does anybody know how a 67S-B, or a Curry Star or another one compares to my Warburton 3S regarding the alpha angle and the shallowness? would really like to find a shallow-flat bottom cup-low alpha angle mouthpiece |
I have owned a 67S-B in the past. To me , it is a medium shallow mouthpiece that has a comparable alpha angle to the Warburton 3S. It might be a hair deeper. It felt tighter to me than the 67MS because of the cup design. I personally have an easier time with the 67MS the the 67S.
I still have my Curry 1 Star. It is a medium shallow mouthpiece that is bowl shaped and feels a little tight to me like the 67S-B. I think the alpha angle and depth i is also similar to your 3S.
I still think the GR C-TZ cups have a lower alpha angle than all of the mouthpieces you have mentioned. This is based on my own personal experience with all of these mouthpieces.
Also, a Curry 600 series M cup would be worth a try because it is inexpensive and you would not have to change the way you blow. The S cup is more flat bottomed to me than the M cup and a really shallow piece.
Hope this helps. _________________ BRM
Van Laar Chuck Findley(silver)
CarolBrass 5000L YST
Marcinkiewicz E13 C. FINDLEY
Lotus 2M (Bronze)
GR 67MS |
|
Back to top |
|
|
|