View previous topic :: View next topic |
Author |
Message |
Pablopiccasso Veteran Member
Joined: 25 Jan 2014 Posts: 204
|
Posted: Fri Mar 02, 2018 2:11 am Post subject: PTFE valve oil |
|
|
I've been using Dennis wick valve oil with ptfe. Is ptfe a good ingredient in valve oil. Most brands don't seem to tell you what's actually in the slip juice they sell.
Informed opinions sought on what makes better valve oil, or doesn't it really make any difference?
We probably all have a Favorite brand, but is the on sale cheapest type just as good really? Anyone got petro-chemical insider knowledge? |
|
Back to top |
|
|
jazzjezz Veteran Member
Joined: 15 Nov 2010 Posts: 108 Location: SE UK
|
Posted: Fri Mar 02, 2018 2:44 am Post subject: |
|
|
I use this oil as well, and previously the Will Spencer Snake Oil... both with ptfe.
The ptfe is in the form of extremely small particles (shake well before use as they do settle to the bottom of the bottle).
PTFE is a very low friction material, the inclusion of it probably aids the lubrication properties of what ever other oils are in the mix. Graphite is another solid lubricant). PTFE is widely used in non-stick surfaces in industry and in the home. It’s pretty inert stuff.
It’s going to have a marketing angle, but there is also at least some science behind it. |
|
Back to top |
|
|
Don Herman rev2 'Chicago School' Forum Moderator
Joined: 03 May 2005 Posts: 8951 Location: Monument, CO
|
Posted: Fri Mar 02, 2018 6:54 am Post subject: |
|
|
PTFE is commonly known as Teflon. It tends to develop a film on the valves that both reduces friction and wear. But, it will probably not mix well with some conventional oils, so be sure to not mix oils and clean the valves and casings if you switch oils.
There are many threads on valve oil in the Other Toys sub-forum. It tends to be a personal choice among a number of good brands. I suspect body chemistry, horn characteristics, and personal preference all play a part in determining what oil is best for you. Like most things, you'll probably have to try a few to find your preference. _________________ "After silence, that which best expresses the inexpressible, is music" - Aldous Huxley |
|
Back to top |
|
|
RandyTX Heavyweight Member
Joined: 25 Mar 2010 Posts: 5299 Location: Central Texas
|
Posted: Fri Mar 02, 2018 9:09 am Post subject: |
|
|
I found the Wick stuff to be quite fast, but to evaporate quite quickly as well. I'm still using it one horn, simply because I haven't got around to flushing it out yet, but I think I'm done with that particular experiment now.
[Correction: I washed that horn last weekend, and put Ultra Pure in. Works just as well or better, so the rest of the Wick bottle is now on the shelf indefinitely.]
Everybody seems to like something different, so don't look for consensus on this, or any other equipment issue amongst trumpet players. _________________ "Music is like candy, you throw the (w)rappers away."
Last edited by RandyTX on Wed Mar 14, 2018 8:27 am; edited 1 time in total |
|
Back to top |
|
|
chuck in ny Heavyweight Member
Joined: 23 Sep 2006 Posts: 3597 Location: New York
|
Posted: Sun Mar 11, 2018 9:45 am Post subject: |
|
|
i don't like the PTFE formulations and feel it's better to have product that easily blends and doesn't need to be shaken to get it mixed properly.
you are relying on teflon where some type of oil would better serve. it's not any big deal either way, just the inelegance of the approach. the teflon formulations work perfectly well and don't seem to clog anything with their sediment. |
|
Back to top |
|
|
Pablopiccasso Veteran Member
Joined: 25 Jan 2014 Posts: 204
|
Posted: Tue Mar 13, 2018 10:50 am Post subject: |
|
|
chuck in ny wrote: | i don't like the PTFE formulations and feel it's better to have product that easily blends and doesn't need to be shaken to get it mixed properly.
you are relying on teflon where some type of oil would better serve. it's not any big deal either way, just the inelegance of the approach. the teflon formulations work perfectly well and don't seem to clog anything with their sediment. |
Yes, I hadn't thought of it that way. A very good point |
|
Back to top |
|
|
jazzjezz Veteran Member
Joined: 15 Nov 2010 Posts: 108 Location: SE UK
|
Posted: Tue Mar 13, 2018 11:10 am Post subject: |
|
|
Quote: | i don't like the PTFE formulations and feel it's better to have product that easily blends and doesn't need to be shaken to get it mixed properly.
you are relying on teflon where some type of oil would better serve. it's not any big deal either way, just the inelegance of the approach. the teflon formulations work perfectly well and don't seem to clog anything with their sediment. |
Excepting, of course, that there is oil there as well - its not just relying on the PTFE.
It might be that having the PTFE in the mix allows a lighter, faster oil to be used... try it and see if you like it... there is an element of science to having the PTFE there. |
|
Back to top |
|
|
|