View previous topic :: View next topic |
Author |
Message |
Dale Proctor Heavyweight Member
Joined: 26 May 2005 Posts: 9382 Location: Heart of Dixie
|
Posted: Sun Apr 28, 2024 4:34 pm Post subject: |
|
|
I didn’t see any critique of Allen valves in your link other than the comment that their small diameter allows them to have faster action, which is true. I played this cornet in a Civil War reenactment brass band for around 25 years and noticed no significant stuffiness. On the contrary, it’s one of the better playing cornets from that era that I’ve played, on par with contemporary Boston instruments. Interesting reading, though…thanks! _________________ "Brass bands are all very well in their place - outdoors and several miles away ." - Sir Thomas Beecham |
|
Back to top |
|
|
etc-etc Heavyweight Member
Joined: 19 Jan 2008 Posts: 6201
|
Posted: Sun Apr 28, 2024 7:56 pm Post subject: |
|
|
Dale Proctor wrote: |
I didn’t see any critique of Allen valves in your link other than the comment that their small diameter allows them to have faster action, which is true. I played this cornet in a Civil War reenactment brass band for around 25 years and noticed no significant stuffiness. On the contrary, it’s one of the better playing cornets from that era that I’ve played, on par with contemporary Boston instruments. Interesting reading, though…thanks! |
Dale,
Indeed the reference above does not say anything about stuffiness of Allen valves - that it is a possibility is entirely my conjecture.
I looked up Allen valves in context of other instruments and found this information from TubeNet, posted in 2004:
Quote: | Thu May 13, 2004 9:39 pm
Chuck,
In the late 1800's horns were made with Allen valves, which were a rotary version of ovalized valves. I have seen these on Hall & Quinby, and Allen & Hall over the shoulder tubas, as well as a Lehnert centennial model tuba.
On the tubas I have played, they were far more ovalized than on the piston ovalized valve structures. While visually this gives the impression that they would induce resistance and stuffiness to the horns, all three such horns I have played have been exceptionally nice blowing horns.
It gives a very small diameter valve, perhaps a 5/8" diameter rotor for a fairly small bore over the shoulder E-flat tuba.
I'm pretty certain these are the subject of an early U.S. patent. When I locate it, I'll post a scan.
|
This confirms your observation that rotary Allen valves, using a "depressed circle" cross-section, can be superior in performance to other models. |
|
Back to top |
|
|
stuartissimo Heavyweight Member
Joined: 17 Dec 2021 Posts: 1016 Location: Europe
|
Posted: Sun Apr 28, 2024 8:58 pm Post subject: |
|
|
etc-etc wrote: | the shepherd crook is not contributing much to the sound. Unless, of course, you listen with your eyes |
Sometimes that makes all the difference though. The senses and the mind are strongly connected. There have been studies that indicate people even taste with their eyes. So even if it's purely mental it still contributes to the sound. _________________ 1975 Olds Recording trumpet
1997 Getzen 700SP trumpet
1955 Olds Super cornet
1939 Buescher 280 flugelhorn
AR Resonance mouthpieces |
|
Back to top |
|
|
Dale Proctor Heavyweight Member
Joined: 26 May 2005 Posts: 9382 Location: Heart of Dixie
|
Posted: Sun Apr 28, 2024 9:01 pm Post subject: |
|
|
Thanks for the additional info - nice research! The Allen valves on the Lehnert cornet are pretty tiny. I also had occasion to play a Henry Lehnert Eb cornet with the same valves, and it was a very good instrument, too.
_________________ "Brass bands are all very well in their place - outdoors and several miles away ." - Sir Thomas Beecham |
|
Back to top |
|
|
DAVIDTHEWRITER Regular Member
Joined: 23 Apr 2024 Posts: 39 Location: SoCal, USA
|
Posted: Sat May 18, 2024 5:23 am Post subject: |
|
|
I have convinced myself that I need a shepherd crook cornet. I want that final degree of mellow and dark and brown from my cornet. I'm actively seeking an irresistible deal on any color Jupiter 520 cornet in really great shape. The virtually identical 700 model has replaced the 520. Some day I will have money to own both and I will investigate if there is more than one molecule of difference. I keep reading that the Yamaha shepherds crook cornet models cannot hold a candle to the Jupiter 520 sound. _________________ Ode to Joy is my earworm. It's a blessing and a curse. |
|
Back to top |
|
|
DAVIDTHEWRITER Regular Member
Joined: 23 Apr 2024 Posts: 39 Location: SoCal, USA
|
Posted: Sat May 18, 2024 5:43 am Post subject: |
|
|
Man Of Constant Sorrow wrote: | "Don't believe everything you read on the Internet".
(ever hear this before ?) |
I've read that Jupiter S C cornets sound better than the equivalent Yamaha S C cornets. And appears to me there are five or more times the volume of used Yamaha S C cornets on the market. The Jupiter S C cornets appear much less frequently than the Yamaha S C cornets, which is interesting. _________________ Ode to Joy is my earworm. It's a blessing and a curse. |
|
Back to top |
|
|
iiipopes Heavyweight Member
Joined: 29 Jun 2015 Posts: 559
|
Posted: Sun May 19, 2024 3:57 pm Post subject: |
|
|
DAVIDTHEWRITER wrote: | I have convinced myself that I need a shepherd crook cornet. I want that final degree of mellow and dark and brown from my cornet. I'm actively seeking an irresistible deal on any color Jupiter 520 cornet in really great shape. The virtually identical 700 model has replaced the 520. Some day I will have money to own both and I will investigate if there is more than one molecule of difference. I keep reading that the Yamaha shepherds crook cornet models cannot hold a candle to the Jupiter 520 sound. |
Remember, it's not just the crook. It's the overall package, including the bell profile matched to the bore. Yes, many of the shepard's crook bell cornets, including my Globe Stamp 921, have that wider throat and larger bore, and make the tone desired. But also takes a V cup mouthpiece, of which there are now many: Wick, Alliance, Curry (TC & BBC), Sparx, etc. I also, depending on the shading, use depending on the occasion, a Curry 3BBC, Curry 3TC, and a Wick 4B. I do need to get a Wick 4 one of these days. So look at the entire package, not just the crook. _________________ King Super 20 Trumpet; Sov 921 Cornet
Bach cornet modded to be a 181L clone
Couesnon Flugelhorn and C trumpet
Last edited by iiipopes on Mon May 20, 2024 8:48 am; edited 1 time in total |
|
Back to top |
|
|
Subtropical and Subpar Heavyweight Member
Joined: 22 May 2020 Posts: 642 Location: Here and there
|
Posted: Sun May 19, 2024 5:16 pm Post subject: |
|
|
"What's so special about shepherd's crook cornets?"
For one thing, they fit into the Protec Cornet PRO PAC case that I just bought, unlike the slightly - but fatally - longer King Silvertone American cornet I bought it for [shakes fist towards the heavens]. _________________ 1932 King Silvertone cornet
1936 King Liberty No. 2 trumpet
1958 Reynolds Contempora 44-M "Renascence" C
1962 Reynolds Argenta LB trumpet
1965 Conn 38A
1995 Bach LR18072
2003 Kanstul 991
2011 Schilke P5-4 B/G
2021 Manchester Brass flugel |
|
Back to top |
|
|
stuartissimo Heavyweight Member
Joined: 17 Dec 2021 Posts: 1016 Location: Europe
|
Posted: Sun May 19, 2024 9:22 pm Post subject: |
|
|
Subtropical and Subpar wrote: | "What's so special about shepherd's crook cornets?"
For one thing, they fit into the Protec Cornet PRO PAC case that I just bought, unlike the slightly - but fatally - longer King Silvertone American cornet I bought it for [shakes fist towards the heavens]. |
Ugh, that's unfortunate. Hope you can still return the case. Is it the length or the height?
Fwiw, some long cornets do fit in the Protec Pro Pac. My Olds Super cornet for example does fit in it, which I thought that was one of the longer ones... _________________ 1975 Olds Recording trumpet
1997 Getzen 700SP trumpet
1955 Olds Super cornet
1939 Buescher 280 flugelhorn
AR Resonance mouthpieces |
|
Back to top |
|
|
Subtropical and Subpar Heavyweight Member
Joined: 22 May 2020 Posts: 642 Location: Here and there
|
Posted: Sun May 19, 2024 10:42 pm Post subject: |
|
|
stuartissimo wrote: | Subtropical and Subpar wrote: | "What's so special about shepherd's crook cornets?"
For one thing, they fit into the Protec Cornet PRO PAC case that I just bought, unlike the slightly - but fatally - longer King Silvertone American cornet I bought it for [shakes fist towards the heavens]. |
Ugh, that's unfortunate. Hope you can still return the case. Is it the length or the height?
Fwiw, some long cornets do fit in the Protec Pro Pac. My Olds Super cornet for example does fit in it, which I thought that was one of the longer ones... |
It's the length. My Connstellation 38A fits nicely, but I bought it for this King Silvertone, whose case a) smells like death incarnate and b) has leather that bleeds on every surface it touches, and the Silvertone just doesn't quite fit. The pity is there really aren't very many cornet cases on the market. Perhaps the Conn will live in the new case and the Silvertone will live in the multi-horn case the Conn was in.
I'm a bit used to it now, as the Kanstul 991 I've had for some years now is both quite long, has a wide wrap, and a 5 1/4 inch bell. It fits in nothing save for the case it came in. _________________ 1932 King Silvertone cornet
1936 King Liberty No. 2 trumpet
1958 Reynolds Contempora 44-M "Renascence" C
1962 Reynolds Argenta LB trumpet
1965 Conn 38A
1995 Bach LR18072
2003 Kanstul 991
2011 Schilke P5-4 B/G
2021 Manchester Brass flugel |
|
Back to top |
|
|
etc-etc Heavyweight Member
Joined: 19 Jan 2008 Posts: 6201
|
Posted: Mon May 20, 2024 11:52 am Post subject: |
|
|
Have you tried the Protec "PRO PAC Trumpet Case with Mute Section"? Same as the cornet ProPac, the horn is in playing position when placed in the case, but the case is markedly longer.
|
|
Back to top |
|
|
DAVIDTHEWRITER Regular Member
Joined: 23 Apr 2024 Posts: 39 Location: SoCal, USA
|
Posted: Mon May 20, 2024 3:07 pm Post subject: |
|
|
iiipopes wrote: | Remember, it's not just the crook. It's the overall package, including the bell profile matched to the bore. Yes, many of the shepard's crook bell cornets, including my Globe Stamp 921, have that wider throat and larger bore, and make the tone desired. But also takes a V cup mouthpiece, of which there are now many: Wick, Alliance, Curry (TC & BBC), Sparx, etc. I also, depending on the shading, use depending on the occasion, a Curry 3BBC, Curry 3TC, and a Wick 4B. I do need to get a Wick 4 one of these days. So look at the entire package, not just the crook. |
Thank you for this one stop consultory. Can we apply tha same maker > model alignment to a trumpet? _________________ Ode to Joy is my earworm. It's a blessing and a curse. |
|
Back to top |
|
|
GordonH Heavyweight Member
Joined: 16 Nov 2002 Posts: 2894 Location: Edinburgh, Scotland
|
Posted: Tue May 21, 2024 1:02 am Post subject: |
|
|
... the big jump in diameter from the exit from the third valve to the tail of the bell. In some cases, bridged by a tube. _________________ Bb - Scherzer 8218W, Schilke S22, Bach 43, Selmer 19A Balanced
Pic - Weril
Flugel - Courtois 154
Cornet - Geneva Heritage, Conn 28A
Mouthpieces - Monette 1-5 rims and similar.
Licensed Radio Amateur - GM4SVM |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|