View previous topic :: View next topic |
Author |
Message |
ChopsGone Heavyweight Member
Joined: 20 Dec 2008 Posts: 1793
|
Posted: Sat Dec 26, 2015 2:54 pm Post subject: |
|
|
If you're planning on performing in public with that quintet, and if you can handle the technical demands the closer-spaced harmonics cause, I'd agree wholeheartedly with James Becker. My granddaughter's case was one of needing to introduce the literature to the students, strictly for classroom use, so substitutions were acceptable. With the limited number in the class, they were inevitable. The tweaked mello came a lot closer to sounding like a proper horn than I'd expected, but it's not the best choice if anyone else can hear you playing it. It's sort of like trying to make that undersized Chinese Wagnertuba sound like a real one - OK for tosser level, not for more than private enjoyment.
The good part is that there are a lot of very serviceable used horns out there at reasonable prices. New ones don't seem to come that way if they're worth having. _________________ Vintage Olds & Reynolds & Selmers galore
Aubertins, Bessons, Calicchios, Courtois, Wild Things, Marcinkiewicz, Ogilbee Thumpet, DeNicola Puje, Kanstuls.... |
|
Back to top |
|
|
Craig Swartz Heavyweight Member
Joined: 14 Jan 2005 Posts: 7770 Location: Des Moines, IA area
|
Posted: Sat Dec 26, 2015 4:02 pm Post subject: |
|
|
James Becker wrote: | Just to be clear, a Mellophone in F is an octave higher than a French Horn. It's akin to the high Horn in F on a triple Horn.
Unless you plan to march or play Kenton Mellophone charts I'd stick to Horn.
Mt 2 cents. | Yes. Not to mention the melli still will sound like crap if you are playing with real musicians...
Those Kenton charts were great, though, weren't they? There was a whole Christmas set. Good stuff! |
|
Back to top |
|
|
Hugh Anderson Veteran Member
Joined: 22 Sep 2011 Posts: 398
|
Posted: Sat Dec 26, 2015 5:34 pm Post subject: |
|
|
You don't have to get the marching version. Ebs are great. |
|
Back to top |
|
|
RandyTX Heavyweight Member
Joined: 25 Mar 2010 Posts: 5299 Location: Central Texas
|
Posted: Sun Dec 27, 2015 2:11 pm Post subject: |
|
|
A quality tenor horn (Eb) like used in a brass band would be another good option. Arguably easier to blend in to a small ensemble than a french horn, because the bell isn't pointed in the opposite direction, although it points up like a euph or tuba. _________________ "Music is like candy, you throw the (w)rappers away." |
|
Back to top |
|
|
Richard III Heavyweight Member
Joined: 22 May 2007 Posts: 2655 Location: Anacortes, WA
|
Posted: Sun Dec 27, 2015 2:35 pm Post subject: |
|
|
Thanks for all the advice. Rentals for double horns were either not available or so expensive, it didn't make sense. I decided to take the plunge and bought a slightly used double horn off Ebay. They say that the secret to keeping your mind young is to learn new things. I'll certainly be expanding my horizons. There certainly are more mouthpiece options available now than there were 35 years ago. Fun times ahead. _________________ Richard
King 1130 Flugabone
King 12C mouthpiece |
|
Back to top |
|
|
Craig Swartz Heavyweight Member
Joined: 14 Jan 2005 Posts: 7770 Location: Des Moines, IA area
|
Posted: Sun Dec 27, 2015 3:07 pm Post subject: |
|
|
Good for you! Enjoy. All you dudes who think a tenor in Eb/F is so great, I know where you can pick up a Mirophone (shaped like a fetal position) rotary pretty reasonably. (Hint, hint, but won't hold my breath) |
|
Back to top |
|
|
stumac Heavyweight Member
Joined: 19 Nov 2008 Posts: 697 Location: Flinders, Australia
|
Posted: Sun Dec 27, 2015 4:25 pm Post subject: |
|
|
Congratulations Richard, you have done the right thing, enjoy.
When I joined the community orchestra in 1990 to play Fr horn, the section was a trumpet player playing an Eb tenor horn, it did not blend with anything and the intonation was terrible. When we got a couple more horns I moved to trumpet to get away from it, the other horns complained and I convinced him eventually to change places, I dont think he ever realized the reason.
Regards, Stuart. |
|
Back to top |
|
|
James Becker Heavyweight Member
Joined: 02 Sep 2005 Posts: 2827 Location: Littleton, MA
|
|
Back to top |
|
|
cheiden Heavyweight Member
Joined: 28 Sep 2004 Posts: 8914 Location: Orange County, CA
|
Posted: Mon Dec 28, 2015 10:32 am Post subject: |
|
|
It took me a few weeks to get my French Horn chops back after not playing one for 30 years. I really enjoyed it. In my case I just borrowed an old Conn 8D (I think) from a local school. What I really liked was a new Yamaha I tried at a local music shop. SO much easier to play!
Yeah, French horns are expensive. If you can't buy/rent a French horn I'd either recruit a trombone or try it on Flugelhorn. _________________ "I'm an engineer, which means I think I know a whole bunch of stuff I really don't."
Charles J Heiden/So Cal
Bach Strad 180ML43*/43 Bb/Yamaha 731 Flugel/Benge 1X C/Kanstul 920 Picc/Conn 80A Cornet
Bach 3C rim on 1.5C underpart |
|
Back to top |
|
|
Richard III Heavyweight Member
Joined: 22 May 2007 Posts: 2655 Location: Anacortes, WA
|
Posted: Tue Dec 29, 2015 7:17 am Post subject: |
|
|
Since I've been looking at mouthpieces, I noticed that the diameters seem larger in general than trumpet mouthpieces. I don't remember this being so in the past. In fact, I remember the reverse. I ended up ordering a mouthpiece from a line that actually had sizes closer to what I'm used to playing.
I ordered a Wick Paxman. Any opinions? _________________ Richard
King 1130 Flugabone
King 12C mouthpiece |
|
Back to top |
|
|
cheiden Heavyweight Member
Joined: 28 Sep 2004 Posts: 8914 Location: Orange County, CA
|
Posted: Tue Dec 29, 2015 8:28 am Post subject: |
|
|
Yeah, it came as a shock to me too that French horn mouthpiece inner diameters are typically larger than those on trumpet. I didn't find the larger ID to be any sort of problem since the blow of the F Horn is so very different. In fact, I was playing as high, with little strain, as much more experienced horn players. And endurance was never an issue, which has never been the case with my trumpet playing.
I think I went with a Faxx "Farkas MC" which was cheap and worked out just fine. And FWIW my Bb piece at the time was a Bach 3C. I've not tried the Paxman. _________________ "I'm an engineer, which means I think I know a whole bunch of stuff I really don't."
Charles J Heiden/So Cal
Bach Strad 180ML43*/43 Bb/Yamaha 731 Flugel/Benge 1X C/Kanstul 920 Picc/Conn 80A Cornet
Bach 3C rim on 1.5C underpart |
|
Back to top |
|
|
bike&ed Heavyweight Member
Joined: 24 Dec 2004 Posts: 1837
|
Posted: Tue Dec 29, 2015 11:10 am Post subject: |
|
|
When did this larger diameter trend happen with horn mouthpieces? I've never seen one that was as wide as a trumpet mouthpiece, but it's been about 6 years or more since I've looked closely at (or played on) a (French) horn. |
|
Back to top |
|
|
cheiden Heavyweight Member
Joined: 28 Sep 2004 Posts: 8914 Location: Orange County, CA
|
Posted: Tue Dec 29, 2015 11:19 am Post subject: |
|
|
I'm not sure it's ever been different regarding ID. In my case it was just a problem with perception. The thin rim has always been the case though I've seen a few recently that were really really thin.
I'd advise would-be doublers not to hang up on the larger ID, thin rim French Horn mouthpiece. The instrument blows entirely differently and these mouthpieces work. And tempting as it is, any attempt to make it more trumpet-like is really not necessary, and likely to cause problems. _________________ "I'm an engineer, which means I think I know a whole bunch of stuff I really don't."
Charles J Heiden/So Cal
Bach Strad 180ML43*/43 Bb/Yamaha 731 Flugel/Benge 1X C/Kanstul 920 Picc/Conn 80A Cornet
Bach 3C rim on 1.5C underpart |
|
Back to top |
|
|
JeffTheHornGuy Veteran Member
Joined: 07 Feb 2013 Posts: 174 Location: Boston
|
Posted: Tue Dec 29, 2015 11:47 am Post subject: |
|
|
As a horn doubler, I would go with a conn 6D or 8D. They are both easy enough to go back and forth, but I think the intermediate level 6D has a more trumpet-like blow. _________________ Trumpet player in Couch
Puje "Super T"
1970 Bach Stradivarius 37
Custom Lawler C7
Electronic music producer |
|
Back to top |
|
|
Richard III Heavyweight Member
Joined: 22 May 2007 Posts: 2655 Location: Anacortes, WA
|
Posted: Tue Dec 29, 2015 1:17 pm Post subject: |
|
|
After going over much information on this site:
http://hornmatters.com/
I went with a Holton H-378G. It is an intermediate level horn. I read that the Conns had quite the uneven quality control. _________________ Richard
King 1130 Flugabone
King 12C mouthpiece |
|
Back to top |
|
|
James Becker Heavyweight Member
Joined: 02 Sep 2005 Posts: 2827 Location: Littleton, MA
|
Posted: Wed Dec 30, 2015 4:16 pm Post subject: |
|
|
Richard III wrote: | I went with a Holton H-378G. It is an intermediate level horn. I read that the Conns had quite the uneven quality control. |
Unless your Holton Horn was made in Elkhorn Wisonsin you'll be surprised to know Holton instruments are now manufactured in Eastlake Ohio alongside Conn Horns.
Back in the day Holton used to give their Elkhorn plant employees a cash bonus at Christmas. At some point without any advanced warning changed to giving their employees turkeys instead. Talk about a hit to worker's moral, it's believed that the loss of a Christmas bonus was one cause for a drop in quality control. So you might want to ask, is your Holton a pre-turkey or post-turkey instrument?
Anyone else heard of this story? I believe my source is very reliable. _________________ James Becker
Brass Repair Specialist Since 1977
Osmun Music Inc.
77 Powdermill Road Rt.62
Acton, MA 01720
www.osmun.com
Our workshop is as close as your nearest UPS store https://www.ups.com/dropoff?loc=en_US |
|
Back to top |
|
|
razeontherock Heavyweight Member
Joined: 05 Jun 2004 Posts: 10609 Location: The land of GR and Getzen
|
Posted: Wed Dec 30, 2015 5:15 pm Post subject: |
|
|
Richard III wrote: | I decided to take the plunge and bought a slightly used double horn off Ebay. |
Merry Christmas! French horn is such a gorgeous instrument |
|
Back to top |
|
|
Crazy Finn Heavyweight Member
Joined: 27 Dec 2001 Posts: 8336 Location: Twin Cities, Minnesota
|
Posted: Wed Dec 30, 2015 5:21 pm Post subject: |
|
|
Richard III wrote: | I went with a Holton H-378G. It is an intermediate level horn. I read that the Conns had quite the uneven quality control. |
James Becker wrote: | Unless your Holton Horn was made in Elkhorn Wisonsin you'll be surprised to know Holton instruments are now manufactured in Eastlake Ohio alongside Conn Horns.
Back in the day Holton used to give their Elkhorn plant employees a cash bonus at Christmas. At some point without any advanced warning changed to giving their employees turkeys instead. Talk about a hit to worker's moral, it's believed that the loss of a Christmas bonus was one cause for a drop in quality control. So you might want to ask, is your Holton a pre-turkey or post-turkey instrument?
Anyone else heard of this story? I believe my source is very reliable. |
That turkey story is interesting!
Anyway, as was alluded to above, Holton and the rest of Leblanc was bought by the Steinway Corporation - which also owns Conn and Vincent Bach not to mention dozens of other instrument brands in the mid 2000's. Production of all Holton instruments in Wisconsin ceased a few years later.
There might be differences in specifications from Conn models to Holton, but they're produced in the same factory, by the same workers, for almost a decade, now. _________________ LA Benge 3X Bb Trumpet
Selmer Radial Bb Trumpet
Yamaha 6335S Bb Trumpet
Besson 709 Bb Trumpet
Bach 184L Bb Cornet
Yamaha 731 Bb Flugelhorn |
|
Back to top |
|
|
James Becker Heavyweight Member
Joined: 02 Sep 2005 Posts: 2827 Location: Littleton, MA
|
Posted: Thu Dec 31, 2015 6:56 am Post subject: |
|
|
Regarding the quality of Conn Horns, there was an uptick in quality when production moved from Abeline, TX to Eastlake, OH. As with many mergers some components were blended.
For example rotor casings were changed to deep drawn King rotor casings and the eventual elimination of cast braces for bell and mouthpipe to stamped King style braces.
From our perspective the quality of components is very high, however the mounting and final assembly could stand a bit more attention. For this reason we offer our Horn prep service which addresses these issues. Similar to our trumpet blueprinting service, we take any off the shelf horn and thoroughly inspect, correct deviations and finely adjust mechanisms to bring it to the highest level.
So if you would like to purchase a new Horn with our Osmun prep or have an existing Horn you'd like prepped we're available to service your instrument.
I Hope this is helpful.
Happy New Year everyone! _________________ James Becker
Brass Repair Specialist Since 1977
Osmun Music Inc.
77 Powdermill Road Rt.62
Acton, MA 01720
www.osmun.com
Our workshop is as close as your nearest UPS store https://www.ups.com/dropoff?loc=en_US |
|
Back to top |
|
|
Richard III Heavyweight Member
Joined: 22 May 2007 Posts: 2655 Location: Anacortes, WA
|
Posted: Thu Dec 31, 2015 8:08 am Post subject: |
|
|
Quote: | From our perspective the quality of components is very high, however the mounting and final assembly could stand a bit more attention. For this reason we offer our Horn prep service which addresses these issues. Similar to our trumpet blueprinting service, we take any off the shelf horn and thoroughly inspect, correct deviations and finely adjust mechanisms to bring it to the highest level.
So if you would like to purchase a new Horn with our Osmun prep or have an existing Horn you'd like prepped we're available to service your instrument.
|
Nice service. Next trip to the east coast will include a visit. _________________ Richard
King 1130 Flugabone
King 12C mouthpiece |
|
Back to top |
|
|
|