View previous topic :: View next topic |
Author |
Message |
OldSchoolEuph Heavyweight Member
Joined: 07 Apr 2012 Posts: 2441
|
Posted: Mon Dec 21, 2020 8:01 am Post subject: |
|
|
James Becker wrote: | Andy, truth be told, years ago Wayne Tanabe at his Brass Bow ship made casing extensions with modular internal weights with an o-ring. His inspiration came from the long casings found on Getzen Eterna Cornets.
Curry makes 1” Magnum bottom caps for Schilke. Perhaps hollowing out CCAPS on a lathe would achieve the desired effect of extending casings without the excess weight. This is something we could do for you. |
Can you guys go into a little more functional detail on how this works, because I am having trouble understanding the mechanics.
Horns with longer valve blocks typically also have longer pistons - unless they have a stem spacer on top. Even with a spacer type piston, there is a lot of mass in that piston in addition to the longer casing structure which I don't see represented in an extended hollow cap. Relative to the weighted caps though (and I am talking the mild variety used to roughly offset for one piece casings on a Bach, not the extra heavy variety), wont there be as much mass in a 1 inch casing extension as is added to the standard heavy cap? So is it something about resonance of the length of the block ? (having trouble picturing the valve block as a free resonator)
This sounds fascinating, so any theoretical details would be most appreciated. _________________ Ron Berndt
www.trumpet-history.com
2017 Austin Winds Stage 466
1962 Mt. Vernon Bach 43
1954 Holton 49 Stratodyne
1927 Conn 22B
1957 Holton 27 cornet
1985 Yamaha YEP-621
1975 Yamaha YEP-321 Custom
1965 Besson Baritone
1975 Olds Recording R-20 |
|
Back to top |
|
|
James Becker Heavyweight Member
Joined: 02 Sep 2005 Posts: 2827 Location: Littleton, MA
|
Posted: Mon Dec 21, 2020 10:27 am Post subject: |
|
|
Namely Benge 8Z has longer spring barrels, and Schilke P-7 have taller valve stem bases in order to repurpose trumpet pistons in longer valve casings.
The Getzen Eterna Cornet uses identical pistons to their trumpets, just a longer than average casing.
Whether someone wants to launch a study of the effects or not, this is one of the most successful models in Getzen’s line up.
Building trumpets on longer and shorter valve blocks has been done ny several makers, including Monette and I believe Taylor or Eclipse.
Extending the casings alone adds substantial mass, so having modular hollow extensions would be relatively easy to manufacture. _________________ James Becker
Brass Repair Specialist Since 1977
Osmun Music Inc.
77 Powdermill Road Rt.62
Acton, MA 01720
www.osmun.com
Our workshop is as close as your nearest UPS store https://www.ups.com/dropoff?loc=en_US |
|
Back to top |
|
|
Andy Del Heavyweight Member
Joined: 30 Jun 2005 Posts: 2665 Location: sunny Sydney, Australia
|
Posted: Mon Dec 21, 2020 3:23 pm Post subject: |
|
|
Olds recording cornet as well... by my measuring, its about an inch more length in the valve casing. I'd compare it to a piston trumpet, but who has one of these at the beach house?
cheers
Andy _________________ so many horns, so few good notes... |
|
Back to top |
|
|
Bionx Veteran Member
Joined: 02 Apr 2010 Posts: 181 Location: Singapore
|
Posted: Sun Jun 18, 2023 10:54 am Post subject: |
|
|
What happened to the harmonic balancers? Not on Osmun’s website anymore. I can’t seem to find much about them on google either. Are they no longer produced? _________________ Bb Yamaha Xeno YTR-9335NYS
Bb Bach Strad 190S37 50th Anniversary
C Bach Philly
C Conn Vintage One
Bb Yamaha Xeno YCR-8335S
Scodwell USA Flugelhorn |
|
Back to top |
|
|
lipshurt Heavyweight Member
Joined: 24 Feb 2008 Posts: 2642 Location: vista ca
|
Posted: Sun Jun 18, 2023 4:34 pm Post subject: |
|
|
Conn bottom sprung casings are longer and it changes things quite a bit. For instance the 22b with top springs is lighter block than the 22b with bottom springs _________________ Mouthpiece Maker
vintage Trumpet design enthusiast
www.meeuwsenmouthpieces.com
www.youtube.com/lipshurt |
|
Back to top |
|
|
Jimbosan Regular Member
Joined: 15 Dec 2023 Posts: 47
|
Posted: Wed Jan 17, 2024 2:22 pm Post subject: |
|
|
I put this together out of parts that I already had in my plumbing supplies. That's the 3rd slide of my Olds Custom Crafted trumpet. The horn is naturally bright and I want to see if I can dampen it a little without making it too dead. If I like the change I can look for brass parts at ACE Hardware. If I really like the change, I may pay for an aftermarket set. I also have brass washers that fit in the lower valve caps, so I can try a combination of things. It's cheaper than changing mouthpieces or buying aftermarket gimicks on a whim.
_________________ Kanstul FBClassic bflat&C
'42 Buescher205
'45 Committee
'47 Holton48
'47 Conn22b
'48 Benge
'69 Olds Custom Crafted
'78 Getzen Eterna
'64 Bach Strad Cornet
'62 Olds Spl Cornet
'64 Conn 80a
'54 Conn 34a
Benge flugel
Olds,DEG Bugles |
|
Back to top |
|
|
Ronnman Veteran Member
Joined: 09 Aug 2019 Posts: 409 Location: SE Louisiana
|
Posted: Wed Jan 17, 2024 2:51 pm Post subject: |
|
|
Jimbosan wrote: | I put this together out of parts that I already had in my plumbing supplies. That's the 3rd slide of my Olds Custom Crafted trumpet. The horn is naturally bright and I want to see if I can dampen it a little without making it too dead. If I like the change I can look for brass parts at ACE Hardware. If I really like the change, I may pay for an aftermarket set. I also have brass washers that fit in the lower valve caps, so I can try a combination of things. It's cheaper than changing mouthpieces or buying aftermarket gimicks on a whim. |
Jimbosan - that’s a pretty cleaver and cheap damper/weight, using a couple faucet washers and a screw/nut 8-24? How did it effect the tone? Interest because I have an Olds CC.
Ron _________________ Martin Committee #2 1954
Leblanc “Al Hirt” Model 1966
Olds Custom Crafted Ultra Sonic 1974
Edwards Gen II 2014 |
|
Back to top |
|
|
Jimbosan Regular Member
Joined: 15 Dec 2023 Posts: 47
|
Posted: Wed Jan 17, 2024 3:27 pm Post subject: |
|
|
Ronnman wrote: | Jimbosan wrote: | I put this together out of parts that I already had in my plumbing supplies. That's the 3rd slide of my Olds Custom Crafted trumpet. The horn is naturally bright and I want to see if I can dampen it a little without making it too dead. If I like the change I can look for brass parts at ACE Hardware. If I really like the change, I may pay for an aftermarket set. I also have brass washers that fit in the lower valve caps, so I can try a combination of things. It's cheaper than changing mouthpieces or buying aftermarket gimicks on a whim. |
Jimbosan - that’s a pretty cleaver and cheap damper/weight, using a couple faucet washers and a screw/nut 8-24? How did it effect the tone? Interest because I have an Olds CC.
Ron |
I have a cut on my bottom lip so I haven't tried it yet. _________________ Kanstul FBClassic bflat&C
'42 Buescher205
'45 Committee
'47 Holton48
'47 Conn22b
'48 Benge
'69 Olds Custom Crafted
'78 Getzen Eterna
'64 Bach Strad Cornet
'62 Olds Spl Cornet
'64 Conn 80a
'54 Conn 34a
Benge flugel
Olds,DEG Bugles |
|
Back to top |
|
|
dr_trumpet Heavyweight Member
Joined: 22 Nov 2001 Posts: 2533 Location: Cope, IN
|
Posted: Wed Jan 17, 2024 5:41 pm Post subject: |
|
|
Bionx wrote: | What happened to the harmonic balancers? Not on Osmun’s website anymore. I can’t seem to find much about them on google either. Are they no longer produced? |
They were made by Curry and available for some time on Mouthpiece Express, but have disappeared there too. _________________ Dr. Albert L. Lilly, III DM
Artist/Clinician for Vincent Bach Trumpets (Conn-Selmer)
Principal Trumpet, Hendricks Symphony (Avon, IN)
Arranger/Composer; Lilly Music |
|
Back to top |
|
|
Andy Cooper Heavyweight Member
Joined: 15 Nov 2001 Posts: 1833 Location: Terre Haute, IN USA
|
Posted: Sun Jan 21, 2024 9:29 am Post subject: |
|
|
" harmonic balancers"
You can test this with cork wedged into the inside curve of the slide crooks. I use gasket cork scraps left over from making mute corks.
There really can be a difference - at least in the practice room. I can't say there is a difference to the audience but there is a difference in player feedback. |
|
Back to top |
|
|
|