Joined: 07 Apr 2006 Posts: 2164 Location: Olympia, Washington
Posted: Thu Feb 18, 2021 7:28 pm Post subject: Al Hirt's Mouthpiece
Hello all-
I seem to recall that years ago, I had a Jet-Tone Al Hirt trumpet mouthpiece that had no markings indicating the cup depth or rim contour. I had assumed this was Al's personal model mouthpiece and that you just got a copy of what he played when you bought one.
I currently have a Jet-Tone Severinsen mouthpiece that likewise has no markings other than the DS notation.
I just purchased a beautifully preserved Leblanc Al Hirt trumpet and think it would be fun to get a copy of the exact mouthpiece Al played.
Does anyone know what cup depth and rim shape in the current Al Hirt Jet Tone models that correspond most closely to what Al played?
Are there original, non-marked Al Hirt Jet-Tones still out there (used, of course)? I haven't really seen any.
Joined: 07 Apr 2006 Posts: 2164 Location: Olympia, Washington
Posted: Thu Feb 18, 2021 10:27 pm Post subject:
Thanks much, Stuart!
I have a plethora of Bach 1 1/2C and 3C mouthpieces of all vintages, as well dozens of other sizes. I also have many examples of mouthpieces from other makers.
Just let me know what you need, my friend and I'll swap you.
Joined: 09 Aug 2019 Posts: 409 Location: SE Louisiana
Posted: Fri Feb 19, 2021 4:15 pm Post subject:
Winghorn - I have 3 Jet-Tone Al Hirt Mouthpieces. In the pic below, from left to right: Al Hirt, no markings, aluminum gold anodized, Al Hirt Model B, Al Hirt Model A. The Model B is deeper and has a larger throat than the A and is similar to the no marking aluminum mouthpiece. I remember someone on TH, possibly Tony Scodwell, stated Al Hirt played a Jet-Tone Model T3.
Ron
_________________ Martin Committee #2 1954
Leblanc “Al Hirt” Model 1966
Olds Custom Crafted Ultra Sonic 1974
Edwards Gen II 2014
I also have an aluminum Al Hirt. Mine is labeled Al Hirt Model C. I will try and get a picture up tomorrow for you. _________________ Bb: FrankenBach, '72 Committee, Conn 22B, King 2070SGX
C: Bach 229-MK slide/pipe, Bach 226 with YTR-9445(2) pipe
D/Eb: Bach 239 with YTR-9636 pipe
Picc: Stomvi Master, Couesnon Monopole
Cornet: Schilke A2C, '23 Buescher
Flugel: Scodwell Prototype
Joined: 15 Feb 2005 Posts: 2814 Location: Coarsegold, CA
Posted: Sat Feb 20, 2021 2:51 pm Post subject:
Al Hirt was such a virtuoso, with double and triple tounging and breathtaking technique. He was classically trained at the famous Cincinnati Conservatory.
I've always wondered what equipment he was using there, immersed in lessons, recitals, chamber groups and orchestra. All the mouthpieces I've seen from his professional career in pop and jazz have been very commercial-looking mouthpieces with shallow cups and wide rims.
Surely he must have used more conventional mouthpieces when he was a student. I'd love to hear from someone familiar with this stage of his playing and development.
Joined: 24 Feb 2005 Posts: 1844 Location: Fresno, California, USA, North America, Earth, Solar System, Orion Arm, Milky Way Galaxy, Universe
Posted: Sat Feb 20, 2021 4:14 pm Post subject:
markp wrote:
Al Hirt was such a virtuoso, with double and triple tounging and breathtaking technique. He was classically trained at the famous Cincinnati Conservatory.
I've always wondered what equipment he was using there, immersed in lessons, recitals, chamber groups and orchestra. All the mouthpieces I've seen from his professional career in pop and jazz have been very commercial-looking mouthpieces with shallow cups and wide rims.
Surely he must have used more conventional mouthpieces when he was a student. I'd love to hear from someone familiar with this stage of his playing and development.
Al Hirt was the first trumpeter I ever heard. I had just picked trumpet to play in 5th grade, and my mom took me to the local library to find a record. I saw the cover of an album with a guy (Al Hirt) holding a trumpet, so I grabbed that. I listened to that album a lot.
I'm always amazed at how he got such a massive sound out of a very small mouthpiece! _________________ The name I go by in the real world is Joe Lewis
Posted: Thu Feb 25, 2021 12:43 am Post subject: Re: Al Hirt's Mouthpiece
Winghorn wrote:
Hello all-
I seem to recall that years ago, I had a Jet-Tone Al Hirt trumpet mouthpiece that had no markings indicating the cup depth or rim contour. I had assumed this was Al's personal model mouthpiece and that you just got a copy of what he played when you bought one.
I currently have a Jet-Tone Severinsen mouthpiece that likewise has no markings other than the DS notation.
I just purchased a beautifully preserved Leblanc Al Hirt trumpet and think it would be fun to get a copy of the exact mouthpiece Al played.
Does anyone know what cup depth and rim shape in the current Al Hirt Jet Tone models that correspond most closely to what Al played?
Are there original, non-marked Al Hirt Jet-Tones still out there (used, of course)? I haven't really seen any.
Thank you.
Steve
I can’t speak directly to what Al would have played at any particular time in his career, but I’ll add what little I know about Jet-Tone Al Hirt models from Bill Ratzenberger in the ‘60s and ‘70s.
The Jet-Tones that came after Ratzenberger were nothing like the originals. I tried to get a spare Al Hirt-A in the ‘90s and – over a few years – was met with three different iterations with that marking – one even claiming to be as “the original” – that were ridiculously unlike the original.
So, any discussions of Al Hirt Jet-Tones are very slippery.
A, B, C, and D were rim contours – flat → → to round
The Al Hirt was one of the “Standard” models
►Al Hirt – shallow
►Studio – medium
►Symphony – deep
… all sepc’ed at 41/64”
(The other “Standard” pieces were T-1, T-2, T-3, T-4, also 41/64”)
Medium ID, and very shallow, the Al Hirt-A came with a “loose 23” throat. I don’t know anything about the BB
I played a silver-plated, brass Al Hirt-A JetTone, which I ordered from the shop in Connecticut in 1970 (along with a Studio-A, a Symphony-A, and a Fluegelhorn-A), for 35+ years. I never came to terms with the aluminum versions.
Steve Patrick makes an homage to the old Al Hirt-A, but I don't know if the throat is correct.
-Denny
Oh ► the DS on the original Jet-Tones is for Dave Stahl, not for Doc.
Joined: 07 Apr 2006 Posts: 2164 Location: Olympia, Washington
Posted: Thu Feb 25, 2021 3:15 am Post subject:
Thanks, Denny!
But in another thread entitled Jet Tone Mouthpiece, it was pretty conclusively established that the "DS" on the original Jet-Tones was for Doc Severinsen, not Dave Stahl.
The Dave Stahl models were said to have been marked "D. Stahl" or "SS". This information was apparently garnered from some earlier Jet Tone catalogs.
Joined: 09 Aug 2019 Posts: 409 Location: SE Louisiana
Posted: Thu Feb 25, 2021 4:18 pm Post subject:
DS is the Doc Severinsen Jet-Tone model. See some acquire sheets of info on Jet-Tone mouthpieces. I believe the first one is the modern recreations and the second is the original Jet-Tones.
Ron
_________________ Martin Committee #2 1954
Leblanc “Al Hirt” Model 1966
Olds Custom Crafted Ultra Sonic 1974
Edwards Gen II 2014
Joined: 07 Apr 2006 Posts: 2164 Location: Olympia, Washington
Posted: Thu Mar 04, 2021 9:46 pm Post subject:
Thanks, Jeff-
You are right. But was the rim on the mouthpiece Al himself actually played one of the lettered ones (A?), or was Al's personal rim different from any of the rim models listed?
That is why I asked about an Al Hirt Jet-Tone mouthpiece that had no marking for the rim shape- no A, B, C or D, but was just inscribed "Al Hirt". I would assume this mouthpiece had the exact rim Al played.
I have a DS (Severinsen) Jet-Tone mouthpiece from the Ratzenberger era that has no marking for the rim shape, just a "DS" inscription. I also have a Getzen Severinsen model mouthpiece that likewise has no rim designation. Again, I assume both these mouthpiece have the rim actually used by Doc.
Does anyone have a Al Hirt Jet-tone without a rim designation?
In the early '70s Bill Ratzenberger gave me several mouthpieces like the left-most one in the picture of three above. He told me that Al would only play that unmarked model of the several that bore his name.
During a gig in 1978, Vince Shank produced an identical one from his pocket saying that Al had given it to him in New Orleans a few years earlier. It is anodized aluminum, has a ruler-flat rim and a fairly large bore. (Either 22 or 24, it's been a long time since I measured.)
He recommended I try it, and then loaned it to me while we continued our tour until I could have one of mine sent to meet us.
(Vincent is a wonderful musician. A remarkable and generous human being.) _________________ searching
Joined: 07 Apr 2006 Posts: 2164 Location: Olympia, Washington
Posted: Mon Apr 26, 2021 12:53 pm Post subject:
Well, I was able acquire a mint, as new, original Jet-Tone Al Hirt mouthpiece from the Ratzenberger era!
It is made of aluminum and has a gold anodized finish. It is just stamped "Al Hirt Model" with no other markings.
It is shallow and has a wide, flat rim, which makes estimating the cup diameter difficult. The throat is quite large.
I am actually a little surprised that I can fairly comfortably play the thing, considering its rim shape and cup diameter! I have always had trouble with the later Al Hirt models, as they just felt too small and constricting.
So...
It is by far the easiest playing trumpet mouthpiece I have ever owned. Even the upper register seems effortless, and double and triple tonguing is a breeze. And the tone is actually quite good considering how shallow the cup is.
But after playing it a few minutes, my chops start to revolt and it becomes clumsy. I guess my "muscle memory" from playing a Bach 1 1/2C mouthpiece for so many years is incompatible with the Jet-Tone's design elements and playing characteristics.
I am sure I could adapt to the Jet-Tone over time, but right now I am afraid to try. Maybe in a few years after my strength and breath support have declined, I can pull it out and hopefully keep on playing!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum