View previous topic :: View next topic |
Author |
Message |
Zach_314 New Member
Joined: 17 May 2023 Posts: 3
|
Posted: Sat Jul 08, 2023 5:30 pm Post subject: Where to get a horn modified? |
|
|
Apologies if some of these questions seem obvious, but horn mods are one of the areas I'm least knowledgeable about. I have a Yamaha 6810 piccolo trumpet that I absolutely love, but find intonation frustrating without the ability to move my slides. I'm curious about how possible it is to have the third slide modified to move freely and have a ring installed. It currently is not an over/under configuration, so I don't know how much that affects things. It is also not perfectly in line, and sits at a very slight angle off the valve block. If these modifications are possible, does anyone know who could perform them? Thanks! _________________ Composer-Arranger-Trumpeter
Yamaha First Gen New York Bb
Yamaha Third Gen Chicago C
Yamaha Ytr-6810 Piccolo |
|
Back to top |
|
|
kehaulani Heavyweight Member
Joined: 23 Mar 2003 Posts: 9033 Location: Hawai`i - Texas
|
Posted: Sat Jul 08, 2023 6:38 pm Post subject: |
|
|
Ask:
J. Landress Brass
https://www.jlandressbrass.com/
Charlie's (Melk) Brass Works
http://charliesbrassworks.com/ _________________ "If you don't live it, it won't come out of your horn." Bird
Yamaha 8310Z Bobby Shew trumpet
Benge 3X Trumpet
Benge 3X Cornet
Adams F-1 Flghn |
|
Back to top |
|
|
huntman10 Heavyweight Member
Joined: 30 Aug 2017 Posts: 697 Location: Texas South Plains
|
Posted: Sat Jul 08, 2023 6:40 pm Post subject: |
|
|
As a retired engineer, my favorite saying to my boss was, "If you wanna pay for it, we can do it!" But I would find a trusted tech to work on your baby. It wouldn't be necessary to reverse the tubes, since the ring would be attached to the ferrule in n the end of the slide. Mainly just align the tubes, lap them, and attach a ring like the one on my Stomvi Elite Pic, or my old Kanstul 1520. _________________ huntman10
Collector/Player of Fine (and not so fine) Brass Instruments including
Various Strads, Yammies, Al Hirt Courtois, Schilkes,
Selmer 25, Getzen Eternas, Kanstuls (920 Pic, CG)
Martin Custom Large Bore, Lots Olds!, Conns, etc. |
|
Back to top |
|
|
oliver king Heavyweight Member
Joined: 07 Aug 2008 Posts: 1742
|
Posted: Sat Jul 08, 2023 9:14 pm Post subject: |
|
|
Best Instrument Repair in Oakland will give you excellent service and a reasonable price. _________________ LB Bel Canto #59
Holton B47
Frankenhorn projects 1-5
Adams F1
Olds Super Tenor Trombone
Alesis QS8
B2MS3, B2GS3, |
|
Back to top |
|
|
larsken Regular Member
Joined: 02 May 2008 Posts: 77
|
Posted: Sun Jul 09, 2023 4:59 am Post subject: Larson BrassWerks |
|
|
www.brasswerks.com I have some time in September... We seemed to have fallen off the the first hundred pages or so of google lol
Thx
Ken |
|
Back to top |
|
|
dstpt Heavyweight Member
Joined: 14 Dec 2005 Posts: 1286
|
|
Back to top |
|
|
dstpt Heavyweight Member
Joined: 14 Dec 2005 Posts: 1286
|
Posted: Sun Jul 09, 2023 6:12 am Post subject: |
|
|
Another option would be to sell what you have a get Brent Peters to make you a Pujé Pique (piccolo trumpet)! Google it to see pique-tures. You can tune down any note on the horn with the left thumb-actuated pushrod ("trigger") system to the main tuning slide. Lots of options. Big sound, being a 3-valver...plays very well in tune without the use of the main trigger, btw. |
|
Back to top |
|
|
Bájoc Music Regular Member
Joined: 06 Jan 2023 Posts: 46 Location: Portland, MI
|
Posted: Sun Jul 09, 2023 3:35 pm Post subject: Re: Where to get a horn modified? |
|
|
Zach_314 wrote: | Apologies if some of these questions seem obvious, but horn mods are one of the areas I'm least knowledgeable about. I have a Yamaha 6810 piccolo trumpet that I absolutely love, but find intonation frustrating without the ability to move my slides. I'm curious about how possible it is to have the third slide modified to move freely and have a ring installed. It currently is not an over/under configuration, so I don't know how much that affects things. It is also not perfectly in line and sits at a very slight angle off the valve block. If these modifications are possible, does anyone know who could perform them? Thanks! |
I thought I would jump on here and add myself to the list of available repair techs who would be happy to assist
Adding a ring to the 3rd slide should be no problem. Whether you would like it positioned on the top, bottom, or even at the front of the crook (like older Selmers and others), that would be fairly easy to fabricate and fit onto your YTR-6810 3rd slide.
As another option, and I refer now to what dstpt mentioned here about Anton Possegger's dual 3rd-4th slide trigger assembly, you can have a trigger assembly installed to actuate your 3rd slide. For reference, here are some pics of what I did for my Bájoc Bb/A piccolo prototype (this does have a dual 3rd-4th trigger assembly installed, with adjustable 4th):
Feel free to send me a PM or reach out to me on my contact page (https://bajocmusic.com/connect/) if you are interested or have any questions. Thanks!
Best regards,
Jacob _________________ https://bajocmusic.com/
I am driven to work generously in the service of others' musical creativity. |
|
Back to top |
|
|
jkarnes0661 Veteran Member
Joined: 17 Nov 2007 Posts: 254 Location: Grand Rapids, MI
|
Posted: Sun Jul 09, 2023 3:44 pm Post subject: |
|
|
I'll add a recommendation for Jake's work at Bajoc Music, he just finished an orchestral Eb bell for my E3L which included fabricating the outer sleeve that attaches to the bell and slides over the tube exiting the 1st valve. He's also done some general repair work on my horns and everything he's done has been fantastic! _________________ Jonathan Karnes
Grand Rapids, MI
jonathankarnes.com |
|
Back to top |
|
|
stuartissimo Heavyweight Member
Joined: 17 Dec 2021 Posts: 990 Location: Europe
|
Posted: Sun Jul 09, 2023 10:34 pm Post subject: |
|
|
Where are you from? Most of the great names in the USA are shared frequently on these forums...but for other parts of the world, not so much.
Is there something like say, a sticky or something that lists skilled technicians both in the USA and around world? If not, should we ask the moderators to make such a thread? _________________ 1975 Olds Recording trumpet
1997 Getzen 700SP trumpet
1955 Olds Super cornet
1939 Buescher 280 flugelhorn
AR Resonance mouthpieces |
|
Back to top |
|
|
dstpt Heavyweight Member
Joined: 14 Dec 2005 Posts: 1286
|
|
Back to top |
|
|
|