View previous topic :: View next topic |
Author |
Message |
Rwwilson Veteran Member
Joined: 13 Sep 2019 Posts: 188 Location: Austin Texas
|
Posted: Tue Mar 12, 2024 9:11 am Post subject: Care of Modern Custom Finishes |
|
|
Until now I’ve had only raw brass, silver plated or lacquered brass horns. I recently received a new horn that has lacquer over an intentionally tarnished surface. I have two questions. The first is: does this finish require any additional care? and two: do modern lacquers stand up to handling better than those used in the mid to late 1900s? |
|
Back to top |
|
|
LittleRusty Heavyweight Member
Joined: 11 Aug 2004 Posts: 12664 Location: Gardena, Ca
|
Posted: Tue Mar 12, 2024 10:42 am Post subject: |
|
|
What does the retailer or manufacturer advise? I would trust their advise over an unknown like me on the internet. |
|
Back to top |
|
|
Divitt Trumpets Heavyweight Member
Joined: 11 Aug 2015 Posts: 520 Location: Toronto
|
|
Back to top |
|
|
JayKosta Heavyweight Member
Joined: 24 Dec 2018 Posts: 3308 Location: Endwell NY USA
|
Posted: Tue Mar 12, 2024 12:37 pm Post subject: Re: Care of Modern Custom Finishes |
|
|
Rwwilson wrote: | ... do modern lacquers stand up to handling better than those used in the mid to late 1900s? |
--------------------
That probably depends on what 'modern lacquer' was used on your instrument.
Reality is that all lacquer finishes will eventually wear through at contact points and depending on your body chemistry, environment, etc.
If the lacquer was applied for maximum durability, that might be a clue.
If applied for minimum interference with the sound, that might be something else. _________________ Most Important Note ? - the next one !
KNOW (see) what the next note is BEFORE you have to play it.
PLAY the next note 'on time' and 'in rhythm'.
Oh ya, watch the conductor - they set what is 'on time'. |
|
Back to top |
|
|
Man Of Constant Sorrow Veteran Member
Joined: 25 Jun 2023 Posts: 473
|
Posted: Tue Mar 12, 2024 9:09 pm Post subject: Re: Care of Modern Custom Finishes |
|
|
Rwwilson wrote: | ... I recently received a new horn that has lacquer over an intentionally tarnished surface. |
That's interesting.
Please elucidate. _________________ Sub-Optimal Hillbilly Jazz |
|
Back to top |
|
|
Rwwilson Veteran Member
Joined: 13 Sep 2019 Posts: 188 Location: Austin Texas
|
Posted: Wed Mar 13, 2024 8:55 am Post subject: |
|
|
The horn is a slightly used Taylor fluegelhorn. The lead pipe, valve block and tuning slides all have an antique brass finish protected by lacquer. The two piece bell is copper that has been treated to give it a very dark, almost dark mauve color except around the rim, in small random areas and along the seams where the normal copper and brass colors show through. I have no idea how this was done. It also is lacquered. |
|
Back to top |
|
|
|