View previous topic :: View next topic |
Author |
Message |
jamie Regular Member
Joined: 25 Sep 2003 Posts: 77
|
Posted: Mon Feb 16, 2004 2:49 pm Post subject: |
|
|
okay this may sound totally crazy but it works. you know the discoloration you get on your slides , that black stuff, well a really easy way to get that stuff to go away is to get an eraser and then erase it. make sure that the grease on your slide is off and try to use a softer eraser not a hard one. it sounds crazy but it works , don't push on it hard just do it lightly. i wasn't totally sure where this should go so i figured that it could fit here, anyway happy erasing!! |
|
Back to top |
|
|
_Japle Heavyweight Member
Joined: 17 Nov 2001 Posts: 1110 Location: Viera, Florida
|
Posted: Mon Feb 16, 2004 4:04 pm Post subject: |
|
|
You could use sandpaper, too.
Seriously, the valve clearance on a good trumpet is about 0.0005”. An eraser is abrasive. Use the eraser several times and you can take off a couple of thousandths without noticing.
A better way is to get some muriatic acid at your local pool supply store. Mix a mild solution (30%) in a glass (that’s GLASS, not plastic) deep enough to cover just the valve section, not the spring box, an insert the valve for 30-90 seconds. Rinse thoroughly.
Wear gloves and eye protection and do it outside and you won’t have any trouble.
I’ve used the mild acid on a bunch of vintage horns with blackish-green crap on the valves. Works great. _________________ John
Cape Canaveral |
|
Back to top |
|
|
trumpet manor Veteran Member
Joined: 26 Jun 2003 Posts: 102
|
Posted: Mon Feb 16, 2004 4:21 pm Post subject: |
|
|
jamie DID say slides...never mentioned valves once
_________________
[ This Message was edited by: trumpet manor on 2004-02-16 19:23 ] |
|
Back to top |
|
|
_swthiel Heavyweight Member
Joined: 24 Jan 2003 Posts: 1423 Location: Porkopolis, USA (Cincinnati, OH)
|
Posted: Mon Feb 16, 2004 4:45 pm Post subject: |
|
|
Quote: |
On 2004-02-16 19:04, Japle wrote:
...
A better way is to get some muriatic acid at your local pool supply store. Mix a mild solution (30%) in a glass (that’s GLASS, not plastic) deep enough to cover just the valve section, not the spring box, an insert the valve for 30-90 seconds. Rinse thoroughly.
Wear gloves and eye protection and do it outside and you won’t have any trouble.
I’ve used the mild acid on a bunch of vintage horns with blackish-green crap on the valves. Works great. |
If you decide to use muriatic acid, read the label precautions carefully and follow them! Muriatic acid = hydrochloric acid = strong acid = chemical burn hazard.
Dr. Steve _________________ Steve Thiel
Matthew 25:31-46 |
|
Back to top |
|
|
oneeyedhobbit Veteran Member
Joined: 22 Mar 2003 Posts: 464 Location: Minneapolis
|
Posted: Mon Feb 16, 2004 4:59 pm Post subject: |
|
|
Personally, I'm not a big fan of advising anyone to bust out some kind of harsh acid at home... |
|
Back to top |
|
|
MUSICandCHARACTER Veteran Member
Joined: 28 Jan 2004 Posts: 267 Location: Indiana, USA
|
Posted: Mon Feb 16, 2004 9:48 pm Post subject: |
|
|
Quote: |
On 2004-02-16 19:59, oneeyedhobbit wrote:
Personally, I'm not a big fan of advising anyone to bust out some kind of harsh acid at home...
|
You can buy it at a hardware or pool supply store and he did say to dilute it. Be safe -- wear gloves and goggles. If you don't like acids at home, don't look under the sink. You probably have plenty of them there in all kinds of "cleaning" supplies.
M&C _________________ iBowTie Music -- home of the most comprehensive mouthpiece chart
Authorized Stage 1, Van Cleave, Weril and Stomvi dealer
Many Trumpet Accessories Too! |
|
Back to top |
|
|
Freddieh. Veteran Member
Joined: 01 Jul 2002 Posts: 126
|
Posted: Tue Feb 17, 2004 12:47 am Post subject: |
|
|
Okay, but what do you think about storing a few guns at home ? |
|
Back to top |
|
|
_swthiel Heavyweight Member
Joined: 24 Jan 2003 Posts: 1423 Location: Porkopolis, USA (Cincinnati, OH)
|
Posted: Tue Feb 17, 2004 3:29 am Post subject: |
|
|
Arrgggh!
I forgot to mention- For several reasons, if you are diluting acid, add the acid to the water (rather than adding water to acid).
- If you're not an adult, I strongly urge you to get the assistance of an adult before working with anything hazardous. Make sure they read and follow the label precautions, too!
Hazardous materials can be handled safely if proper precautions are taken. Your home probably has several hazardous materials, follow the label precautions when using any of them.
Dr. Steve _________________ Steve Thiel
Matthew 25:31-46 |
|
Back to top |
|
|
jamie Regular Member
Joined: 25 Sep 2003 Posts: 77
|
Posted: Tue Feb 17, 2004 6:29 am Post subject: |
|
|
i haven't tryed it on the valves yet but it will most likly have the same effect, i'll have to try it today! |
|
Back to top |
|
|
MUSICandCHARACTER Veteran Member
Joined: 28 Jan 2004 Posts: 267 Location: Indiana, USA
|
Posted: Tue Feb 17, 2004 9:50 am Post subject: |
|
|
Quote: |
On 2004-02-17 03:47, Freddieh. wrote:
Okay, but what do you think about storing a few guns at home ?
|
First, let me say, I don't own a gun ... (we are way off topic here). Although some might say listening to me play is like being shot
Second, I would believe the same thing for guns. Store them in a gun safe. Use a trigger lock. They have a purpose like acid, and like acid can be VERY dangerous if misused. So can liquid plumber, rat poison, a carving knife, a chain saw, gasoline for your lawn mower, even your car as a multi-ton 60 MPH projectile.
Safety should be taught and adhered to! Diluted acid is better to clean with than sand paper or steel wool which is abrasive (but also works). If you are uncomfortable with it, OK, then take your horn to a shop and have a professional do it.
M&C _________________ iBowTie Music -- home of the most comprehensive mouthpiece chart
Authorized Stage 1, Van Cleave, Weril and Stomvi dealer
Many Trumpet Accessories Too! |
|
Back to top |
|
|
alwyswinn Regular Member
Joined: 24 Jan 2004 Posts: 82 Location: Espanola, NM
|
Posted: Tue Feb 17, 2004 11:28 am Post subject: |
|
|
Isn't a guns purpose to be dangerous??? You use em to kill people thats the purpose right. Muriatic acid if used carefully is not all to dangerous and is highly unlikely to kill you (don't drink it) if it works use it much better than using abrasives that will cause problems down the road. |
|
Back to top |
|
|
FlugelFlyer Heavyweight Member
Joined: 19 Dec 2002 Posts: 1450 Location: Illinois
|
Posted: Tue Feb 17, 2004 11:47 am Post subject: |
|
|
Another somewhat crazy way to get the slides and sometimes the valves a little bit smoother is to use something called GOOP (yes, that's all capitals). I believe it is a non-toxic detergent you can get at the local grocery store that's also good for washing chemicals off your hands. I've used it on my slides many times with great results and using it on the valves seems to work okay as long as you flush your horn out afterwards. Just another thought. _________________ Trumpet: Bach 180LR, 72 bell
Mouthpiece: Warburton 3XD/KT |
|
Back to top |
|
|
djm6701 Heavyweight Member
Joined: 26 Nov 2003 Posts: 623 Location: Richmond Hill (Toronto) Ontario
|
Posted: Tue Feb 17, 2004 1:58 pm Post subject: |
|
|
Careful on that one! I have a tube of GOOP in the cupboard that is superglue, not detergent! (Not saying there isn't such thing as GOOP detergent, but the stuff in the cupboard is holding the plastic on my wheelwell in the Toyota together, so it ain't gonna be good on your slides! _________________ Dave M.
Richmond Hill (Toronto) Ontario
Kanstul WB1600, 1952 L.A. Olds Recording, 1975 L.A. Benge 3x, 1960's Olds Flugel, Yamaha 631 Flugel
GR 65.6 Mouthpieces
a jazz.fm member |
|
Back to top |
|
|
FlugelFlyer Heavyweight Member
Joined: 19 Dec 2002 Posts: 1450 Location: Illinois
|
Posted: Tue Feb 17, 2004 7:04 pm Post subject: |
|
|
Nope, I definately own a big tub of GOOP, and it's a detergent. However, seeing someone use the "other" GOOP on their slides would be quite hilarious if you didn't say anything first. Definately worthy of the Stella Award . _________________ Trumpet: Bach 180LR, 72 bell
Mouthpiece: Warburton 3XD/KT |
|
Back to top |
|
|
|